Dual optic problems!

[RobBlackk]

So i wired in some dual optics, following the guide i found on here, everything seemed to be okay except from the full beam. It takes ages to switch from dip to full and when it does they are dim. Like someone is trying to light up the road with a candle.

Not really sure where i've gone wrong, Anyone?

Cheers.

 

[BoatNonce]

Can you tell us how you've wired the bulbs up? Sounds like some of the wires are crossed.

 

[RobBlackk]

i followed http://www.cliosport.net/forum/show...-lights-conversion-guide&highlight=Headlights

Thanks

 

[BoatNonce]

Try using this diagram of the connector, it's clearer. One on the right is the earth wire which goes to both bulbs.

 

[RobBlackk]

Thanks bud! I'll have a look this afternoon and get back to you

 

[BoatNonce]

No worries, I had exactly the same when I first wired them up.

Also, have you put a fuse in? Check it hasn't blown if you have. The headlights should stay on with the full beam.

 

[RobBlackk]

What fuse is that mate?

 

[BoatNonce]

This one.
https://www.dropbox.com/s/1d06o48z52l1ju8/DSCF1834.JPG

 

[RobBlackk]

All sorted matey! thanks

 

[danj.richardson]

Is there any easy way round this as the missus`s ph1 doesnt have the fuse terminals, any help would be much appreciated.

Thanks

Dan

 

[BoatNonce]

Without the fuse the lights 'swap' - the headlights go off when the high beam goes on.

Is there just an empty space or is the fuse box a different shape?

 

[danj.richardson]

Its an empty space, no fuse or the terminals so putting
one in wont do anything any ways around it?

 

[BoatNonce]

I don't know, unfortunately.

 

[danj.richardson]

Thats pants, il go to a vehicle electronics shop near me
and see if i can get some sort of relay

 

[kizzzaaa]

This one.
https://www.dropbox.com/s/1d06o48z52l1ju8/DSCF1834.JPG

Hey I have the problem where the dipped goes out when main is turned on but when I add the fuse the mains stop working all together
Caan you help plese
Thanks

 

[BoatNonce]

I'm not sure, have you definitely wired them up properly? I.e. plugged them into the connector in the order shown in the diagram above?