ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
heater controls illumination
- Thread starter mike182
- Start date
Less
It's a right pain believe me...
Head unit out (make sure you know the code!)
Remove the 2 x torx screws on the inside of the H/U recess that secure the lower panel. These are at the front, on the leading edge.
Next remove the blank panel above the cup holder, this pulls towards you. Do not try to prise it downwards as you will break the clips.
Once this is removed you will find 2 more torx screws. Remove these and the unit can now be unclipped from the cables etc and removed.
It requires 1w wedge filament lamps. 2 or 3 of them, I can't remember off hand.
Head unit out (make sure you know the code!)
Remove the 2 x torx screws on the inside of the H/U recess that secure the lower panel. These are at the front, on the leading edge.
Next remove the blank panel above the cup holder, this pulls towards you. Do not try to prise it downwards as you will break the clips.
Once this is removed you will find 2 more torx screws. Remove these and the unit can now be unclipped from the cables etc and removed.
It requires 1w wedge filament lamps. 2 or 3 of them, I can't remember off hand.
Similar threads
