ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

new to 172's what mine phase 2 mk ?



  Renault Clio V6 255
Hi

I have just brought a Cat D 172 on a 02 plate which has had front impact, low down in the centre of the bumper,

So it a phase Mk 1 or 2

were can I get a subframe, bumper, exenon headlights, slam panel, rads, fan etc, wings and bonnet are OK and the air bags did not go off ? why !do i have to go to a stealers, if so which one will give me good deal.

Also the bumper blade is welded to the chassis is this available or will I have to cut it off another car.

the subframe is it specfic to the 172 or will another model one fit.

Not worried about doing the job as i have just restored a triumph stag race car and reshelled a MG ZT V8, so this a walk in the park, well I hope it is.
 
hi and welcome , defo sounds like a mk2 ph2 car as said above , with such a large requirement try a breakers (matt black on here too )
 
So it a phase Mk 1 or 2

were can I get a subframe, bumper, exenon headlights, slam panel, rads, fan etc, wings and bonnet are OK and the air bags did not go off ? why !do i have to go to a stealers, if so which one will give me good deal.

Also the bumper blade is welded to the chassis is this available or will I have to cut it off another car.

the subframe is it specfic to the 172 or will another model one fit.
You mean Mk2 phase 1 or phase 2. Its going to be a phase 2 though.
Will look like this (Mk2 phase 2 )
http://www.nextcar.com.au/rt.i.renault.clio.renaultsport.182.left.JPG
A Mk2 phase1 is this.
http://www.aia.tartu.ee/~indrek/euroopa/prantsusmaa/renault/clio/clio.jpg
Biggest obvious thing is the lights.

Best go to the breakers

Contact details for Renault specialists
http://www.cliosport.net/forum/showthread.php?t=166249

Subframe is the same dimentions as a normal Mk2 of any phase however the none 172/182 ones arn't strengthened and don't have the 3 or 4 holes you need for the gearbox mount (easy to drll them). But noone could realy telle the difference between a normal Clio and the strengthened 172/182 one.
 


Top