ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
16v_paddy's latest activity
-
16v_paddy replied to the thread Clio Williams Project.The Williams and ph2 Valvers have the exact same seats, just a different cloth pattern but they certainly are the best of the bunch It... -
16v_paddy replied to the thread Clio Williams Project.Bordanovasport are spot on, I've bought loads of Williams bits from them over the years
-
16v_paddy reacted to Chris V6 255's post in the thread The Cars Spotted Appreciation Thread with
Like.
Lovely FD2 type R at Liverpool Cars n Coffee yesterday. The chap had just picked it up from Torque GT last week. Only the 2nd time... -
16v_paddy replied to the thread Subframe removal.Worse case scenario is you have to get jiggy with a grinder and just chop the bolt
-
-
16v_paddy replied to the thread Subframe removal.Yep (y) Unfortunately getting the fluid out is going to piss out all over the place & make a mess no matter what you do so use some...
-
16v_paddy replied to the thread Subframe removal.The pipe circled in red goes to the power steering fluid reservoir and the 1 in green connects to the pump The nut & bolt that...
-
-
16v_paddy replied to the thread Subframe removal.On the far right of this pic is where the column connects to and the whole lot drops down as in the pic above it
-
-
16v_paddy replied to the thread Subframe removal.No need to touch any of those, on the bendy joint at the bottom of the steering column, on 1 side of it is a 13mm nut, undo that, pop...
