Recent content by cleanyourcar

Thanks for that! :cool: SF4000 is PO106FA, with the later being the actual product code. It is a very good polish and should finish a clio beautifully.

They upgraded it again since then to be thicker. The one you had was an attempt to remove the smell, although IMHO it didn't work that well!

Iron X paste and and the regular Iron X are the same strength just the paste does cling, it's not sprayable. It seems to sell better for alloys than on paint just because on paint contamination is likely to be all over so suits a spray better, whereas alloys the contamination usually is just...

Nice :cool:

We supply foam lances as well. For a 411A washer you just need a regular Karcker adaptor, it's the same as the K series. Cheers Tim

We could ahve posted it same day for you fella. Just ask and we'd do our best to help. Cheers Tim

Of the sheepskin mitts, personally I think the Sonus Ultimate ones are best without the thumb. They are made from less pieces of skin so less chance of falling apart and have been really fluffy lately.

As above, the Menz pads on a DA give the machine that bit extra bite you need. What polsih did you get? Normal route is PO85RD3.02 on a polishing (orange) moving up to teh white pad if you need more cut. Followe by PO85RD Final Finish for full on gloss.

Ours aren't the cheapest, although we'd price match, but as we buy direct from the manufacturer they come with a D-Handle and canvas carry case which people seem to be really like. The D-Handle is a massive improvement over just the side handle, but they come with that as well. Cheers Tim

For a wax, also consider Victoria Concours, bang for buck it's very good.

hehe thanks as always Alan I know I can always count on your support ;) The Sonus kit would be perfect for you by the sounds of things. The abrasives aren't very aggresive on scale of things as they break down quite easily which is why I always say the SFX kit is a ideal starter kit. Even...

A G220 won't strip paint. I think the people you are talking to are possibly confusing it with a rotary polisher. These are alot more agrresive and can strip paint, but even then with a quality variable speed, unless you have it cranked right up it's very difficult to burn through. A G220...

We've lots of clay in stock where you don't need to buy the QD. Have a look at the Sonus green which can be used often and does a good job on contamination.

The idea is to soften dirt and allow larger debris to be dragged off the surface without having to physically touch teh paint. You can get the car 90% clean by foaming so when you do actually wash it's much safer. As a quick clean you you can get away with not using a mitt at all.