Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Evening all,
I'm really close to finishing my track car but seems nearing the end it's 1 thing after another!
Got a super cheap set of alloys off Facebook and ordered some semi slicks. The specs of the alloys seemed perfect, 15", 6.5 inch wide and et38. They are multi fit 4x100 and 4x108 so...
Morning folks,
Looking at a 2nd hand set of tyres for my first track day. See picture below.
Realistically how much life would this set have left in them for track? They are yokohama A048s. Track is knockhill.
Thanks
Ill have a check but pretty sure it's still fitted. All abs rings are good as far as I'm aware, new disks and pads all round, new abs rings at the back, all calipers rebuilt. The abs light was off most of the drive but did come on near the end. Assumed air in the system would cause it maybe?
So took her out for her first drive tonight since I've done a load of track prep.
Brake pedal is spongy to say the least. Can pump it and it's much better, but still spongy and a fair bit of travel.
Abs light came on too so assume I've got air in there? Would that cause the abs light to come...
Yeah I read that somewhere too.
When I first got the car the reverse lock out was set up badly so you could accidently select reverse when selecting first so it was a nightmare to drive it home.
I did tweak it the other night with a mate. Selected reverse, positioned it in the car so the...
Sorted tonight with a tiny smear of rtv on the face. Only lost half a litre or so of coolant (changed the coolant less than 1 mile ago) so not too difficult a job, took about 10 minutes.
Thanks for the replies 👍
So got it running tonight after sorted a leaking thermostat out. Stuck a couple of gallons of super in and took it a "brisk" drive. Didn't skip a beat and ran perfect all the way through the rev range.
Thanks for all the helpful comments folks!
Now to sort the pms shifter which is set up...