ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
LeeRS's latest activity
-
LeeRS replied to the thread BG 182 rear brake lines.Bled the brakes just now. Rear left bled fine, moved onto rear right and couldn’t get a pedal. Moved onto front left and still had no... -
LeeRS replied to the thread BG 182 rear brake lines.All on and fitted this morning. Easy job to be fair with the full axle kit. Realised I should have started at the hardline end so the...
-
I found it easier to start at the caliper end, leave the fitting loose so that it can still swivel a bit and then route it underneath...
-
LeeRS replied to the thread BG 182 rear brake lines.Braided axle hoses turned up today. Very fast delivery and had them in the fastest colour. Is it just a case of screwing and unscrewing...
-
-
LeeRS replied to the thread BG 182 rear brake lines.Worried about air in the ABS pump now as I have lost a lot of fluid, if not all. If I were to bleed normally using old sloop foot on...
-
I measured up a kit for BRT which went from pump to connection for braided lines. Be on my build thread
-
LeeRS replied to the thread BG 182 rear brake lines.Presuming I’ve lost all fluid as it stands due to the hardline splitting. Guessing I’m going to have issues with the pump?
-
LeeRS replied to the thread BG 182 rear brake lines.Presuming the original lines seem to hold up ok then apart from around the rear beam area? Just checked from the abs pump and they all...
-
Bosch say to keep flexible line down to a minimum when using their abs kit. Think its something to do with the pulsing of the pump.
-
LeeRS replied to the thread BG 182 rear brake lines.Interesting…
-
LeeRS replied to the thread BG 182 rear brake lines.That makes sense. I can visualise it now lol. As it’s not up on a ramp and everything is upside down when you are lying underneath it’s...
-
The same way as the factory lines go. You'll want some rubber grommets for the rear beam where the line pass through to stop any rubbing.
-
LeeRS replied to the thread BG 182 rear brake lines.@Touring_Rob I don’t suppose you have a pic of yours so I can see which route you took with the braided lines to rear brakes do you?
-
LeeRS replied to the thread leeRS Clio Sport 172 ph2.Have a couple of photos from the photographer from the day but this one was my favourite. As the tyres were crap I noticed the...
-
-
Yeah that's no good, you need a proper mummy type one.
