Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Is there any significant difference with the Ktec and Pure Motorsport stud conversion kits
http://www.k-tecracing.com/show_product.asp?id=4784
I appreciate these step down to 1.25 rather than staying 1.5 but I don't see that being a major issue. If anything the fine thread could help prevent...
Mine pulled off real easy (although it was a warm day)
Bit of tar remover and polishing and all sorted.
I left the clio badge on though because of the holes it leaves. I'd get a pic if it wasn't raining.
It's a straight forward fit. No additional cables needed. Just be careful when putting it all back in the dash as its a tight fit.
I ran the mic cable behind the silver dash strip, round the edge of the dash then up the A pillar to the centre light. This way it's hidden but you don't have the...
I went back to standard but had a couple of bigger tail pipes welded on as they are like pea shooters as standard, much nicer looking now.
Before this I had a custom one made but they couldn't get it as quiet as standard, same with the patent part ones on eBay etc.
Another thing to bare in mind is if the steering rack mounts are worn the car won't track properly or will go out of line soon after its been set up as mine did.
Steering rack bushes is also another one to consider. I've got the same issue with mine having already replaced top mounts, ball joints, track rods and ends as well as the shocks.
Mine feels very vague and tramlines a bit, even after it recently had the tracking done. Turns out the rack bushes...