Help, parts needed

P

Paulios

  Clio2 1.2 8valve

• Jun 15, 2025

• #1

Hi everyone, finally got Florence's front end off but in doing so I snapped one of the upper radiator mounting brackets, the L shaped ones. So I'm on the scrounge if anyone has the left hand side bracket. Thanks in anticipation.

 

Flob

ClioSport Club Member

  182, E46 M3, 1000RR

• Jun 15, 2025

• #2

Who is Florence?

They are NLA mate and quite annoying to come by. Take it you snapped the stud off?

 

P

Paulios

  Clio2 1.2 8valve

• Jun 15, 2025

• #3

Florence is my very strange MK2, you know it. All the front end fixings were rusted so the whole job was a right royal pain in the harris

 

Flob

ClioSport Club Member

  182, E46 M3, 1000RR

• Jun 15, 2025

• #4

I repaired one for a mate years ago by welding another stud on, got any mates with a welder?

 

P

Paulios

  Clio2 1.2 8valve

• Jun 15, 2025

• #5

Sounds like a plan mate.

 

Brigsy

ClioSport Club Member

  T.Turbo

• Jun 15, 2025

• #6

These type?

Drill out the remains of the bolt and put a nutsert in.

 

P

Paulios

  Clio2 1.2 8valve

• Jun 15, 2025

• #7

Those look familiar, I'll give the offending article a good coat of looking at tomorrow

 

Brigsy

ClioSport Club Member

  T.Turbo

• Jun 15, 2025

• #8

I might have a refurbed set in the garage if you want to buy a set.

 

P

Paulios

  Clio2 1.2 8valve

• Jun 15, 2025

• #9

What's the damage, amigo?

 

Flob

ClioSport Club Member

  182, E46 M3, 1000RR

• Jun 15, 2025

• #10

Are they not this type?

Brigsy's riv nut suggestion would work with them too.

 

P

Paulios

  Clio2 1.2 8valve

• Jun 15, 2025

• #11

Deffo, the first set

 

P

Paulios

  Clio2 1.2 8valve

• Sunday at 10:04 AM

• #12

Brigsy said:

These type?

View attachment 1747755
Drill out the remains of the bolt and put a nutsert in.View attachment 1747756

Click to expand...

Hi briggsy, drilled out the remains of the captive bolt and replaced it with a bolt and thin locking nut, quick wire brush and a coat of black, hoping that does the trick. Nevertheless thank you for your assistance along the way.

 

P

Paulios

  Clio2 1.2 8valve

• Sunday at 10:08 AM

• #13

Think I should change the name of this thread to "Help, brain needed" what are you like on getting injectors out of the manifold? The now brutalised manifold is off the engine and I want to remove the injectors. How does one do that?