Search results

No VAT 👀

Good old Milltek exhaust, mine always moved after a trackday. Only way i could see it not happening is to v-band every joint.

Assuming you're looking at the dampening crank pulley, the one the aux belt runs off? Get one if it looks rough. As for the actual Megane pulley, it's debatable how much protection it actually gives as it's not that strong of a key. It also makes the timing process a little different in the...

They have the keyway (the slot cut out) but no key in them.

Are you able to drive it? That's best to warm it up.

That's easy to verify as the keyway in the crank should be in the 2 o'clock position between the webbing/casting marks on the block.

Starting it up for 2-3 minutes will be doing more harm than good. Won't be getting hot enough to burn off moisture/fuel in the oil. If the battery isn't too old, whip it out and stick it on the bench in the shed/garage with a charger that does a repair mode and see if it'll recover.

£1200 I think is the ballpark now on these. Depends on garage labour rate.

Tried a leakdown to test for valve leakage?

Bit of a nightmare mate. If you and Chris can't figure it out, no one can 😂

No spacers, stock camber. It was only a tiny amount of rubbing. Ended up running 195 rear and 205 front and that felt like a nice balance. Don't want loads of rear end grip anyway if you want to be quick.

Might be ok. Mine rubbed on the rear with 205 on 7j ET38 2118's during corner on track, no rubbing on the front.

Or telling the apprentice to try and bump start it 😂

All about the blade really. Decent blade for the job will make light work.

Seen people cut cars up with a Milwaukee Sawzall. They do a Super version now.

Jon is probably the nicest guy you could meet off this forum. He is 100% legit.

Why's it generated it left hand drive 😅

The good old days when you dropped your phone and the battery fell out, just to add insult to injury 😂

@Louis is the PMS guru

Didn't know you spoke Spanish, Jon 😂

This is your best option @Luke.brewster

Yeah.

Need to get mine over to Chris for a fresh map. Supposedly makes 315bhp, so would be interesting to see if it is. Plus the cold start isn't great on it.

Sun. Usually s**t clear coat after a respray.

Looks like the clear coat has blistered. Could probably make it look better with wet sanding.

No it's the Ai version, it's basically just reduced the noise.

100x of the moon tonight.

Guessing a loose connection behind the panel. Should be able to pop the panel out fairly easily and have a look.

Look like Twingo RS seats.

Took me a while to figure out why i was only getting 30x zoom. I had it set to 50mp hi-res and it doesn't work in that mode.