Search results

Do you know the source of the smell? If it's in the upholstery, that stuff will only mask it for a while.

Reset dilution is meant to be 400-500:1 from what i've seen, which means i'm already using it weaker than it's meant to be 😂

Yours is similar to mine then. mg/l is ppm Yeah 4 caps is about 30-40ml in a 20L bucket.

That's like 20 washes isn't it 😂 Last me ages that will.

Our area is hard water too. It's at 21 clarke. How many caps fulls of Reset do you use? I use 4 caps and it's perfect. Will try 1900:1 soon now @imprezaworks is sending me some, so i will report back.

I would get the 5L bottle of Pagid fluid from Euro Car Parts and go round the car starting with the longest line first which is the driver's side rear, then passenger rear and so on. Just keep going round doing that until it's air free.

Has the system been dry for a while? If it has it will take quite a bit to bleed it.

I've not got a clue, if you've followed all the steps and it's not working can you get a refund 🤔

I've never done one. Mine was done by previous owner.

Make sure you have decent battery voltage. Maybe even stick a charger on it while you do it. Last thing you want is to lose power and brick your ECU.

Touring car warm up style it is then 😂

Worth a go. If there's no physical standing water, you don't need tread... Although it can help to generate heat with the treadblock moving around. You should be able to heat the front slicks from radiant heat from the brakes as well.

Yeah cool, let me know

It's on air, so it can be lowered to a set point and raised up to normal height for driving. Although some do drive like that 'static' on fixed heigh coilovers.

Any of the Bayside Blue R34? 😍

Get one off a breaker. BTT Motorsport in Wigan might have one.

Yeah it's that ECU information tab there. The bit that says prog tool will say Fastchip

Any neutral colour will look clean. I voted white, but anthracite might be nice too.

When you scan the car, the info about the software version on the ecu will have FASTCHIP in blue. Stick a screenshot on here of yours and i'll be able to tell.

Cruz roof bars are good too. Their Airo ones.

Where have you mounted it? Any pictures?

Can't beat Chemical Guys Stripper Scent or Signature Scent as it's known now. Not a very long lasting smell though.

No you have to fix the fault.

Yeah I don't think it's pressure related as I've done it without any pressure before.

Seen someone have the same problem before and they contacted Henk and he managed to find a way to get around the error. Works fine on mine weirdly, so not sure what's different between our system.

Between the two points on your picture yes. This is what i've based it on

Should be 99mm i think.

These are meant to be good. Pretty sure Alex from AW Autoworks recommended these. https://www.ebay.co.uk/itm/251728117418

I thought new pumps from Renault were NLA now? Pretty sure my guy who did mine in 2017 when it went pop like yours said so anyway.

5W-30! Bit thin that mate :oops: