Search results

The MAD ones or Delta Mics, or H&R for bigger money

I would say you'd be fine. I'd only buy bolt to hub spacers personally. Then use your original bolts.

MAD ones are good yes! How different is the offset between wheels? 25mm are needed for standard 16's IMO

I'd go for the delta mics 25mm hubcentrics as they're cheaper than the H&Rs, just heavier.

Didn't really notice much, but every Clio I've had has had 25mm spacers up front as it looks better

I'm baaaaack! And everyone I've owned

Photos didn't come out great, so this is the best of a bad bunch, quality has been sucked from them too!

25mm/15mm

25mm front 10/15mm rear is perfect. Rear is all dependant on how bent your rear beam is!

Really? You didn't have that long!

You sure? If so, your so kind [emoji4] cheers buddy.

That's perfect, looks exactly like an old one there.

Replace it all with a Ph2 dash. Much better!

I believe, couple of bolts and pull out. The only thing you may find is that some have different styles of handbrake cable which you will need to replace too.

Side strips make all the difference, although I think too much silver now? I'm tempted by anthracite mirrors and bullets with silver writing? Thank you, how much do I owe you? FUUU!!! Edited the shitty photo, it sits fairly even. Hopefully next weekend I'll have all the coilovers apart...

It does, that's why I need to get the suspension off and clean it up so can fully adjust. The rear looks low in that photo but I think I need different springs to bring rear down or taking out the adjusters will give me 5mm.

Started to get dark but car looks so much better clean and with a few changes. I have some better photos, I'll upload later on

Yes he does need one! Car feels good after having a play and getting camber correct. It also made the tracking correct. I need to get the coilovers off and cleaned ideally. Very cheap, few niggly problems but it'll be ok. How's the interior coming? I'm ready when you are to collect! I...

How many times have I heard about super chargers this week [emoji6][emoji6] Thank you for costing me money, lots and lots of money [emoji6] x It's not, it's really not. Undecided on a route to take as this looked mean as. But then Scott's mint one looks so good, unsure if I have the...

DannyR's 10th Ph1 Clio Thread... Everyone always comes back! So, having been without a Clio for 18 months (the longest time in 11 years) due to buying a house it's now time I came back. For those of you that don't know me I will share my past most prominent 172s. My first one I had for 2...

K-Tec must of done it.

Awesome, thank you. I never really left, just had a holiday from Clio's ;). I've not had much time to play yet, handling didn't feel right. But I lowered it a touch more and adjusted the camber and handles a bit better. Also hard coming from such a heavy car, this is now so light to steer...

It's not bad luck, there is obviously a problem, the only way it will be solved is seeing a specialist. Who lengthened the cables before?

If your still coming up on the 28th I'll grab them then if that's ok? I've got some horrible aftermarket ones. Thank you [emoji4]

Can you not just take the car to a specialist, especially if it keeps having issues.

The problem is OEM isn't stitched leather so straight away to me they don't look right on a Ph1. That's the steering wheel, and confirmed it was brand new about 18 months ago.

Does this mean mark has some genuine clear Renault ones spare ;)

Me too!

I have a mint Ph1 172 steering wheel. It's not been recovered, as it's not trimmed in leather, it's completely original. I will grab a picture but it looks brand new. Unsure of new cost, what's it worth?

I think I would be! I know what certain members are like, you and I included! This one I would only aim to supercharge though!