This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Updates.
More Croft prep yesterday. Started off with brakes.
Assume position. Half in garage as galeforce ten wind.
First job was to replace a bearing spacer on the stub axle. Id noticed that the one fitted was cracked when i changed the bearing ages ago.
This was not great as concerns about...
Definitely would only add on to current setup to add more safety. Agreed i wouldnt add timing, as rely on it. Any links to good diy setups?
Ill be over again in the kangoo at some point, will give you a shout next time. Extra goes well on high boost. Id say even though detuned, its fast as it...
Premium all the way. Michelins on any of mine, pilotsport on performance, crossclimates on daily.
Crossclimates will generally do double the mileage of most mid range and grip loads better.
Wont be a fail as separate immobiliser, mot manual says
7.3. Anti-theft device
You only need to inspect the anti-theft device on M1 vehicles first used on or after 1 September 2001 with a steering lock as an anti-theft device fitted as original equipment.
It’s acceptable for a steering lock...
Not really thought about it tbh as i always considered it to be for iat's and the welly cooler i run works well, but from a quick google water/meth looks really good for lowering egts so could work well in this scenario, old high c/r 8v knock limited. One for the future maybe, with modern ecu...
Updates.
Extra van on the dyno at Efi last Sunday for map tweak.
Last time it was tuned, in 2020 was for max power. It was to see what the engine and turbo were capable of when pushed, it made good power 249hp at 27psi. The tune was very close to the edge being close to knock at high rpm, and...
Ref welding, if he had the clamp thing on then you should be OK. Battery reset wont do much, if anything from experience.
Pop uch out and send it to diesel pump repair on ebay. Id bet its that, seems to be a common ish fault.
The r26 that i fitted ecumaster black to a few weeks ago was in at Efi for mapping on Wed. Went down incase of issues, all went well. Had to stop at 24psi as r26 oem throttle body was getting flappy at high rpm, needs an upgrade..
Swichable maps done. 350hp/300ft lb on 14psi/low boost. High...
Looks oem at a glance. Any close up pics of intercooler through the bumper grill?
K&n sticker on airbox so might have a drop in panel filter upgrade. Wash and go instead of replace if decent.
Updates.
Sent the Kangoo and r26 gearknobs and gaitors off for retrim to Otto Retrims recently. Received them back this week, fresh nappa leather.
Had a spare hour on Sat so stuck the kangoo gaitor and knob on.
Looks mega, and the new supplied gear gaitor frame otto sourced for me actually...
Updates.
Todays job was to give the clio dci's a clean up. Ive been using the orange dci this week as the blue one is currently parked due to heater matrix starting to leak. Ive got a nissens one to fit this time but cant be fucked this week, full days work to remove/refit dash so can sit a...
Datalog the wheel speeds on clip and try a combo of turning, see whats going on. If its saying wheel speed itll be related to that, id be looking at the reluctor ring.