What's new
By:
ClioSport.net

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Search results

  1. JamesBryan

    172 C.U.P. (Complete and Utter Poo)

    He's replacing the shocks so no need to be gentle with it.
  2. JamesBryan

    172 C.U.P. (Complete and Utter Poo)

    Loosen it with the car on the ground as well. In the air the damper rod might spin with the gun.
  3. JamesBryan

    172 C.U.P. (Complete and Utter Poo)

    Double check the hub nut is still torqued up to 280Nm.
  4. JamesBryan

    Fog light icon flickering when touching the brake pedal.

    Check the earth points behind the plastic trim in the boot. Where the bottom boot latch is. Water from the black grommets leaking can cause corrosion on them.
  5. JamesBryan

    Monaco 172 Track Car

    Don't need welding when you have JB Weld 😂 A mate once discovered someone had JB Welded 2p coins into the crack of his gearbox casing 😂
  6. JamesBryan

    Monaco 172 Track Car

    Donington is good, Craners puckers the ring piece a bit if going flat out. You'd love Oulton.
  7. JamesBryan

    Thoughts on these 172 arches

    Cleaner than average i'd say.
  8. JamesBryan

    Landlines

    Solution for mobile signal is to use WiFi calling.
  9. JamesBryan

    Gearbox oil

    If it's bang on the level yeah. Mostly likely be just under which isn't an issue.
  10. JamesBryan

    Gearbox oil

    Yeah but you'd do well to see it by eye. Best way to tell is if you open the filler and fluid trickles out. Could use a bore scope if you had one.
  11. JamesBryan

    Mystery of the acoustic valve

    I don't think it hitting a wall at ~20mph is normal 😅 Definitely something not right. Lambda could be a good shout.
  12. JamesBryan

    Mystery of the acoustic valve

    Hmm there's something definitely not right there. Acoustic valve or not, it shouldn't do that. I've not seen that before 🤔
  13. JamesBryan

    Mystery of the acoustic valve

    I've heard/read somewhere that it is used during the warming up cycle/cold start. But I can't remember where I saw that. When you say restricted power, how do you mean? They have a cold limiter in the 6500rpm range if that's what you mean...
  14. JamesBryan

    Engine lost power

    Is it idling high, sounds it a bit. Also that engine is a mess, what's happened to it. Red silicone sealant everywhere 😂
  15. JamesBryan

    Heater Matrix Removal

    It's an absolute pain in the arse to do.
  16. JamesBryan

    Heater Matrix Removal

    You have to pull the blower box back from the bulkhead to allow the pipe side of the matrix to come out. There's bolts under the scuttle panel for that, so wipers off too.
  17. JamesBryan

    Detailing Chat & Questions Thread

    They've all gone up in price. Gyeon's equivalent for 400ml is £48 😳 This might be worth a look https://www.cleanyourcar.co.uk/carbon-collective-repel-fabric-protectant-250ml
  18. JamesBryan

    KTR Clio 2RS Induction Kit - New Version

    Everything about the RamAir is better quality. Them and ITG are really the only ones worth using.
  19. JamesBryan

    KTR Clio 2RS Induction Kit - New Version

    Good luck, they'll probably say it was overtightened.
  20. JamesBryan

    KTR Clio 2RS Induction Kit - New Version

    This is the one i used Daz https://www.ebay.co.uk/itm/390629059729 Appears to be the same 70mm you require. It's just a universal filter from Ram Air.
  21. JamesBryan

    KTR Clio 2RS Induction Kit - New Version

    First one is the type i had, never an issue. Go for that if you're confident you've got the size right.
  22. JamesBryan

    KTR Clio 2RS Induction Kit - New Version

    Check the diameter of the pipe, but one of these are better quality...
  23. JamesBryan

    Brigsy's other cars - formerly kangoo 172 cup

    Chris would do closed loop if you want I'm sure.
  24. JamesBryan

    Coolant expansion bottle?

    I think Febi do one.
  25. JamesBryan

    Random connector - any ideas?

    Same plug type yeah, but i'm sure with it being down by the battery that it's likely the one previously mentioned.
  26. JamesBryan

    HEL brake Lines Clio 172

    Have seen that before, is it the same both sides? Cant remember if they're M8 bolts or not, probably 25mm long.
  27. JamesBryan

    Axle stands

    Flat pads on them look pretty good actually
  28. JamesBryan

    HEL brake Lines Clio 172

    Go easy on the hardline fitting, it should spin but corrosion can seize them on and you'll end up cheesing the end off 😅
  29. JamesBryan

    HEL brake Lines Clio 172

    Yeah they look correct.
  30. JamesBryan

    Axle stands

    If you ever need to go really high up with them, do it in stages if it looks sketchy.
Back
Top