Search results

Good question. I've never messed with the column really. I know the lock barrel comes out, there's a grub screw holding it in and then I think you have to turn the key to remove it.

I don't think there's anything you can mess with when taking the wheel off which would affect the steering lock 🤔

I've got some old Hikvision cameras, i think 4-5mp, not the colourvu stuff. 2 cameras with a 1TB drive gets me 7 days of constant recordings. Depends how long you want to be able to go back. I'm sure you can blank off areas you don't want to capture.

Sure i've seen people measure the Milwaukee 18v stuff and it's actually been more like 20v

Just seems odd for what looks like a pretty much standard car.

Oil cooler? Where are the lines going to then? Oil coolers usually come off a plate where the oil filter is.

Yeah could potentially be running a cooler on the low pressure return.

What are the silver braided hoses in the engine bay for?

Yeah mine made the same noise when low. Needs pressure testing as said, vacuum doesn't prove it'll hold when the system works under pressure at like 6bar. Find a proper AC place that specialises in just that.

I assume the availability of a greater selection of cars.

Get the battery tray/mounting bracket bolted in first and then do the vibratechnic mount.

I could have popped over if i knew you were there on Sunday. Bet it's fun on high boost.

Could be right, i assumed bank 1 sensor 1 😅 I'd log the sensor voltage and see what it's saying. Should be steady voltage if it's working and cat is ok.

Does look like pre-cat. 8200830903 is the part from what i can see. Which is a Bosch unit. https://www.opieoils.co.uk/p-116937-bosch-lambda-sensor-0258010110-ls-10110.aspx Edit: Although it does depend on the connector type, it could also be a Bosch LS6046 (same as a 182) if it's an oval...

What's the fault code it's giving you?

I don't think there is a service interval for it. Probably only gets done with a clutch change. I did mine every year as i could do it myself and it's no more expensive than engine oil. Worth doing if you don't know the history and then it'll be fine for the rest of your ownership. Elf NFX...

My 182 didn't either. Must be 172 vs 182 thing.

Spotted at a car meet @Yeti_runner

Yeah, can't not go ceramic coating on large areas of plastic, too easy. If you can wipe liquid onto a surface and wipe it off again, you'll be fine 😂

Brother got one of their cheaper ones a few years ago, came dented in bottom corner and they didn't want to know. Ok apart from that 😅

Can't see it being a problem to drop the trailer off.

Who's taking a helicopter? Only £60 to land at Cadwell 😂

That's going to get close over bumps/under heavy compression?

Half price cambelt jobs in the paddock i heard 😂

You'd only have about 5 cars on track in Group C 😂

Believe it's 14 at MSV tracks mate.

Yeah Clio/Megane go forever really. I had a mate do an hour in his Megane on a winter day at Oulton years ago 😂 He was trying to get heat into slicks.

10 mins? Sup with you 😂 15 minutes minimum on track, 20 is about right. But yeah, if anything happens like you say it's session over. Luckily the CSF days have had very few stoppages.

Group B booked. How many per group, guessing 30 ish?

I've only ever used Nord in the past. Was really easy to use the app, that way the whole device is using the vpn, not just the web browser.