Search results

are these sneeky pics of transformers 2?

cheers for the responses, i know it will make no difference to performance but i would prefer the single inlet to funnel air away from the lower radiator pipe, the way mine is position the lower feed is touching it and if i rotate my CAF will not attatch properly! seems nothing but i thought...

as above asked renault but there useless and all scappies have got nowt cheers

the latest tom tom advertised on pc world comes with speed camera already installed i had the tom tom one bought for me last year and bought the speed detection software and its great, i dont even have to place it near the gps square on the windscreen to get a signal and if you take a wrond...

cant help you concerning where but aux belts/ tensioners and maybe water pump will be checked for wear? dont mess about with cambelts so if it means travelling a little further to make sure its a reptuable place

have you tried putting th old bulb in to make sure its the LED and maybe not a dodgy battery?

cheers neil i`l have a look

slightly concerning but doesnt suprise me unfortunately my service wasnt at renault so theres no record of it on the system so im going to get all services done at yozza to make the car more legit

the itg one`s will just require the odd clean and relubrication

is it possible to but just a renault clio service manual i`l got the drivers handbook but the dealers lost the service manual cheers

fair enough, you may want to take the 2 funnels off the existing caf and place them inside the 2 holes protuding out of the phase 1 air box

ha ha nice one! have you connected up the CAF john or left a gap to allow abit of noise?

cheers bmh i`l go for that one ;)

much appreciated, is the ITG cotton or foam, alot of people seem to go for it but was wondering what the difference between green or K&N?

i am curious to what the filter looks like within the maxogen is it a round or triangula cone? and is it cotton or foam? reason i ask is i`m converting my standard box to a simila set up and a) not sure what panel filter to go for b) would like to get it as similar set up to a maxogen...

does any one know of a good wheel straightening service that i can go to in the midland area? i`m based in telford and there is just one place that refused to straighten it i would prefer to get a couple more opinions before giving up hope regards rich

question one: why place a small sub in the blummin dash? question two: why are you show casing a car for I.C.E with a celine dion concert?

red trophy drove past piccadilly station in manchester around 2:30

depends what its for, for car cleaning the base medel would be enough to losen dirt if you wanted to use it for more heavy duty ones type karcher into ebay theres a bloke who sells brand new ones at rediculous prices

what you doing with the 16`s justin?

cheers rob i`l have a mooch

now your making me nervous ben :) so just twist ity and it should take the slack out of the cable? without sounding like a complete dribbler (probably too late there) do i remove the clip before twisting ot leave it?

if i was you james, give it ago yourself ans if it really goes pete tong then go to a pro because youolid colour it should be easier to match whereas colours like mine flame red are a two tone colour so very difficult to match that guide is very good so follow that, prep well and take your...

i thought it was the prim ing layer that creats the smooth surfice and sanding it to remove impurities and give a surface that the primer cabn grip too or maybe not???

so can i adjust it anyway using the black bit, earlier you mentioned dont remove the steel clip is that the one you were on about

not sure i`l have a look, do you just twist or is it more complicated than that?

i`l check for fraying then, is it normal for the accelerater pedal to be able to lift right up unlike the clutch and brake which only move the one way?

meant to ask someone where the cable comes out of the throttle body it goes through a 3 inch plastic cylinder before heading down to the bottom of the bulk head is this a kind of adjument/ tightening mechanism cuz it appears you can twist it i maybe talkin utter sh**e tho

trust me i`m crap ;)

sounds simple but i have a special ability to muck things like this up! where can i get the cable / price? cheers