Search results

So did cadwell Wednesday eve was really good night weather was beautiful and no crashes this time 😂😂 Cleaned and loaded ready to go Then home all cleaned in one peice and my turinis back on 😍 Cheers for reading 👍🏻

Cheers mate and yer haha I thought that after I took the pic then I had to do another photo of it the right way up but still posted the wrong one 🫣

So got the EPA’s in didn’t realise it was such a strip but my dad did a nice install giving it its own big fuse in the fuse box I also puts a horn button on the dash as it was always tempremental on the wheel and I also got a new fresh Ali express no plate light 😅 All ready for cadwell eve on...

Soo.. update/revival Car has been been stormed since I did cadwell last November, my first time at cadwell I loved it was a mega day out!! My bother on the other hand would disagree as he sent “wiggly” into the barrier at gooseneck lucky the only thing hurt was his ego car survived just bumper...

Nice progress I have gaz on my 182 they don’t need a refurb but are scabby as f and I want to tidy them up bad!!! and I have to say I can’t fault them on track.. little gross on English roads tho 😂😂

Also cleaned my gearbox best I could was pretty grim just gotta paint the end cover and also got my cup panel in primer don’t look half bad 😅 That’s it for now 👍🏻

Little update slow progress but works been manic 😅 I have got my engine all built up victor rinze head set with all new seals and genuine cambelt kit and dephaser looking good also got all my bits back from powdercoaters😍 think I’m gunner 2k paint front subframe just need to pull my finger out...

Cheers mate I have been slack as I’m only just dropping bit off to powdercoaters 😅 although head is now been skimmed and tested just goto get all the engine bits cleaned 🥵 And as for the beam.. I have done a few and have been successful with every go!! so firstly wire brush on a drill lots...

Cheers mate I have been slack as I’m only just dropping bit off to powdercoaters 😅 although head is now been skimmed and tested just goto get all the engine bits cleaned 🥵 And as for the beam.. I have done a few and have been successful with every go!! so firstly wire brush on a drill lots...

Cheers mate tbf where credit is due they ain’t bad I seen loads worse on later lower mileage cars 🙈😅

Little update got All my new valves lapped in nicely so head will now be going for a light skim leak testing and a good clean along with other engine parts.. Also cleaned the block right up with a needle gun treated and gave a lick of hammerd black looks nice tbf Next I tripped all the back...

Thread bump if helps anyone out but Had this on my kangoo turned out to have a ph1 subframe fitted so track was narrower swapped to ph2 and sorted it as said it was shaft bottoming out on ns 👍🏻

bit more done got pushed out side and fully washed the under side and engine bay with TFR all cleaned up really well next I’ll pull rear beam and tank of for powder coating and treating and under sealing.. few other bits fabricated cup panel and front subframe captives completed it m8...

Blimey new old stock you rekon or just new ?

I’m gunner see if he’ll post 🫣

Google images for ya 😅

Dayum I need some of these!!

Cheers mate the colour is a winner for me and yer it’s pretty fucked but I don’t mind 😅 it’s a survivor!!

Cheers yer mate it’s a 10 footer doors and quarters let the car down but as far as rust go it’s really good! Yer mate unit makes its nice 😅 As said it’s clean I’m gunner put a pair of quarters on it when weather warms up as that would mint it up

So after mechanically restoring my dads flamer I really had the itch for a ph1.. and after bit of time the one piped up that was lurking online with overheating issues and on 200k miles but was was fair he was asking so had to have a look as wasn’t far from me and yer was impressed. I thought I...

Done cadwell couple weeks ago was a mega day and my new to me odessy 😍

That’s my brothers that’s a full resto next year currently refreshing his champ white 30th edition ep3

Yer mate sills are clean I mean I have never had a clio where the subframe captives have all survived either 😅

My old.. my dads now flamer Mechanicals just been restored body is to be attended to next summer only on 70k so it’s mint rust wise 🥵

No much to update did a track eve last month spun it and broke my splitter off 😂😂 but going to cadwell 21st Nov what will be good!! Got some new pads and some r888s and I got my spare speedlines painted up… yer I think I effed up 😂😂 Yer not sure on that but can’t be bothered to do them...

Wow what a road trip mate nice write up as said befor I miss my cup would love another 😂🫣

Cheers mate I’ll bare that in mind 👍

that’s the same as I’m running wheel wise Were you running any wheel or camber spacers? Cheers again

Hi all I know it’s been Probly coverd to death if anyone can point me in thread direction or just tell me on here I’m currently on 195 50 15 just wondering going to 205s are we into big time rubbing on track running gaz gold ect Cheers Ben

Love. It.