ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Search results

  1. paul72s

    RSTuner ABS bleed

    I did mine a couple of weeks ago and had this issue. It worked for me if I entered the bleed procedure pop-up window, then clicked 'Activate ABS pump' then as soon as the procedure ended (when the noise stopped) clicked the 'bleed brake' button for whichever corner. To do the next one I had to...
  2. paul72s

    Brake Woes

    Thanks, after looking at the RStuner kit and liking the idea of being able to read the codes and putting the 98Ron map on, I've ordered one. This will bleed the brakes using the ABS module so hopefully will get rid of the air. After pushing through another litre of fluid with the eezibleed...
  3. paul72s

    Brake Woes

    I'd try the wet grass method but I can't even get enough pressure to brake at all :confused:
  4. paul72s

    Brake Woes

    Hello, I've searched for this issue a few times but can't seem to get to a solution. I changed the brake discs, pads and hoses all round on my 182 but the front nearside nipple sheared off and I lost the brake fluid. The brakes are now all fitted with new nipples but I cannot get any bite...
  5. paul72s

    Trying to turn around an RB 182

    Thanks for the comments, much appreciated. It's a keeper now for sure, so once I've given it a suspension refresh I fancy some toys. A new stereo and under seat sub maybe? When I turn the stock stereo up the interior sounds like it's trying to eat itself! I'm guessing I might have to...
  6. paul72s

    Trying to turn around an RB 182

    On the plus side - I've got these in the hallway waiting to go on :smiley:
  7. paul72s

    Trying to turn around an RB 182

    This week I've been sorting the brakes. They felt poor and the disks quite scored so new one's arrived from Kam Racing: Brembo HC Front and Rear Ferrodo DS2500 Front pads Mintex 144 rear pads HEL Braided lines I wanted to paint the calipers as they were poorly done in yellow at some point...
  8. paul72s

    Trying to turn around an RB 182

    Finally got around to fitting the Scorpion RS192 exhaust last week. I managed to fit various jobs in between almost four weeks of constant rain. New Gasket on the Cat: Shiny new exhaust (there were a couple of small dings in it from transit which is a bit disappointing) I haven't got a...
  9. paul72s

    Strange whining since fitting uprated engine mounts

    When I put the Ktec mounts on mine it made all the noises more noticeable that were already there. The whine in my case was the power steering pump but it certainly wasn't faint.
  10. paul72s

    Trying to turn around an RB 182

    The trip down the motorway really highlighted another issue - the exhaust drone's. After a couple of hours it really annoyed me so I've ordered a Scorpion RS192 system. This will likely be my next update as I'm going to fit it myself. Also got a replacement throttle pedal (yet to fit) from...
  11. paul72s

    Trying to turn around an RB 182

    Update time following my trip to Birchdown. I left the car with the guys in the morning - they loaned me a car so I could occupy myself for the day which was great. I ended up at Cheshire Oaks outlet centre which was not so great. After being bored stupid for hours I headed back. The car...
  12. paul72s

    Few days at the Lake District

    That's not far from me, nice motor. You did well to get good weather, it rains most of the time.
  13. paul72s

    Which paint for door and dash parts?

    The surrounds for my dash display, door handles and window switches are sticky and a bit scratched so I'm thinking of painting them. I've searched the forums but can't see if anyone has done this to match the original colour. Anyone know what the best match might be? It looks like a dark...
  14. paul72s

    stripped thread

    Got my thread gauges today, for the Clio 182 at least the bolts for the plenum are M6 x 1.00
  15. paul72s

    Trying to turn around an RB 182

    Not come across Denso plugs before but they have now been replaced with these: Straight away the idle is more settled and it runs smoother. Also took the opportunity to change the rear exhaust mount while the sun was out (not looking forward to working on this through winter) and the centre...
  16. paul72s

    Trying to turn around an RB 182

    Cheers, It should have been cheaper from what I've found so far but I've already got a car that I daren't maintain myself in case it 'harms it's value' which is annoying, so this is a great way to get stuck in. I'll make sure I ask for a genuine Renault pump if thats whats gone too, don't...
  17. paul72s

    stripped thread

    I've got a stripped plenum bolt on the top left so am interested in this. I'm going to order a thread gauge to find out the correct size although it may take a few days to arrive.
  18. paul72s

    Trying to turn around an RB 182

    The whine from the engine is coming from the drivers side and I originally thought it was a pulley off the auxiliary belt. It seems to get louder though when turning so I'm suspecting the power steering. The guys at Birchdown will be able to diagnose it for sure.
  19. paul72s

    Trying to turn around an RB 182

    As I do more on the car the 'to do' list just gets longer: Belts and pulleys (in a fortnight) Suspected power steering pump replacement Turini wheels (white maybe) Half decent track tyres Brake discs and DS2500 pads Steering feels vague in the centre - a new rack maybe :confused: Front seats -...
  20. paul72s

    Trying to turn around an RB 182

    Thanks for the reply's guys, appreciated. Quick update on the exterior of the car. When i bought it the paint was in poor condition overall but particularly the bumper which had paint flaking off. You can see this in the pic below, around the reg plate light the yellow primer is showing...
  21. paul72s

    Trying to turn around an RB 182

    Cheers, I don't yet but it's on my Christmas list.
  22. paul72s

    Trying to turn around an RB 182

    Since the gearbox was done the car drove a lot quieter. I had a new clutch put in while the box was off the car too. It seems though that as one thing gets fixed the other things that need done become more noticeable. The dephaser rattling when warm is driving me nuts. I've booked the car...
  23. paul72s

    Trying to turn around an RB 182

    I've got it back now and the full strip down and rebuild of the box with new bearings (synchro and gears were ok) was £380. The other bits were extra - new power steering pipes and drive shafts etc.
  24. paul72s

    Trying to turn around an RB 182

    So I decided to sort the engine mounts first on the grounds that all the noises related to the engine and exhaust may go away and any left will be easier to isolate. I put the K-tec set on the off-side, gearbox and Powerflex dogbone mount and went for a test drive. This stopped the clutch...
  25. paul72s

    Trying to turn around an RB 182

    Cheers, It doesn't make financial sense and I've already blown the budget but I love getting bits sorted on it and feeling it come back to what I know is there somewhere.
  26. paul72s

    Trying to turn around an RB 182

    Hi folks, Back in 2005 I had a Black Gold Clio 182 that was great - six months old and my first proper hot hatch. Sold it after a couple of years and had quite a few things since then but I always remembered the 'go-kart' like fun of the Clio. Roll forward to a month ago and I needed a car to...
  27. paul72s

    Hello, new owner (again)

    Hello, Just bought a 182 to fix up for the work commute and hopefully some track days. Had a 182 back in 2006 for two years and loved it so snapped up a local one I saw for sale this week. This one is not in as good condition as the last one to say the least, it's on about 120k and feels...
Top