Search results

Hi guys I'm part way through fitting the pure motorsports mounts and brace and have ktec coilovers, do I need the spacer between the top cup of the coilover and the mount. Any advice is welcomed and appreciated, the guide on pure motorsports website only shows standard shocks. cheers ​si

Hi guys maybe a dumb question but as I didn't fit the coilovers I'm not sure, would I need spring compressors to change the top mounts? any help appreciated, cheers, Si.

Hi guys here's my quandary, I fitted new rear pads about ten days ago and since doing so I've had an awful rotating sort of noise, now I think it's a N/S/R wheel bearing on its way out, can't here a lot of noise when jacked up and spun but I think I can here something other than the pads...

Hi guys, hoping all with apple skills can help, a while ago my laptop messed up and had to get a new one, now foolishly i had no back up of anything anywhere, luckily I don't download much but the small amount I did has now gone, how do I go about reinstating it all without having to repurchase...

Hi guys, so my clio failed its MOT today because the nyloc nuts on the suspension strut top mount aren't on far enough(suspension locking device ineffective [ 2.5.A.4 ] ), and the nylon isn't actually gripping on the thread and never has, this has obviously been like this since the coilovers...

Hi all, been talking to Lewis today who's car is sorted now since pranging it at Combe at the action day so thought it was time for another Taunton mini meet. Friday 22nd June, 8pm at Taunton drive thru maccys. I'll send out some txts and some pm's when I'm on the laptop. Cheers Si

Hi guys n girls, seeing as I've owned my Clio since 2008 and find myself signed off work I thought I'd do a progress thread for the Inferno, so here goes. I bought the Clio in September 2008 after starting work at a Renault Dealership, saw the car on my first day there and had bought it 3 days...

Anyone up for this, meet at McDonald's/Hollywood bowl car park at about 8, late notice I know, postcode for those not that local is TA1 2LP, all are welcome.

Evening guys, I'm getting my wheels powdercoated soon, the process says they will be lacquered so I am going to assume the fact they are powdercoated and not just painted won't matter. My questions are; 1. How soon after I pick the car up will I be able to apply Gtech C5 or similar product? 2...

So a couple of us are meeting up at McDonald's at hankridge farm in Taunton tomorrow nite (2/3/12) at about 9ish, thought I'd throw a thread up incase anyone else local fancied coming along.

So yesterday i had my first attempt at claying the bodywork of the cup, i was amazed at the feel of the paintwork afterwards. Wasn't actually sure what section to put this in, but as its not a full on detail clean really and more pic motivated i thought i'd put it in here. Anyways there are a...

As above, light came on on dash, took to a mates garage who plugged in a DTC reader and it came up with a manifold pressure sensor permanent fault, would this be as simple as a faulty sensor or could it indicate a bigger problem? Cheers for any help you guys can offer. Simon

So after finally being slapped with a £60 fine for my euro look plates I went out and had another little play with the camera, again the car could be cleaner and i still need a bit of work on my photography/lighting skills! C&C welcomed as are any tips. Cheers, Simon. And my fave pic...

Hi guys, anyone got this exhaust, I'm tempted by it, just wondering what you think of it and if anyone has pics of it on car? Cheers Simon

Hi guys, I've been searching but not really found the answers to a couple questions i have, hopefully you can all help me. I have a 182 cup and am looking to push the wheels out a bit, obviously looking at hubcentric but the questions i have are as follows; 1. Does anyone with a 182 cup have...

Recently bought a new camera and have seen pics done like this on here so thought i'd give it a whirl, bear in mind its my first try and experimenting and yes i know the car is dirty!! Oh and i'm not sure how to put the pics on here so they're big, if anyone wants to have a go/let me know how...

Hi guys I'm looking to get my wheels refurbed as the scuffs I have on them are the only thing letting the car down, wondering if anyone can recommend a good company in Somerset and I'll want to get them done one at a time so if anyone can lend me a spare wheel I can pick up and return to them...

Saw an inferno 182 cup heading towards chelston roundabout from taunton direction today at about 2:30, if you're on here it'd be good to meet up and compare inferno's! Simon

Just recieved my k-tec air filter and wondering if I need to oil it before installing it, anyone else got this filter, it does look like there is moisture in the packaging so I'm thinking it's pre-oiled.

Hi all, need some help/advice, I have to fit a ph1 stalk as i have the sabelt rs wheel and need a horn, I know how to fit it but need to remove the squib ring assembly,(to get to the srews to remove the old stalk), which requires a special tool almost like a torx shape but not torx, anyone else...

Hi guys i dont post many threads as i can usually find all the advice i need by searching topics but cant seem to find much about this noise i get. I have K-TEC coilovers and solid top mounts and when turning, mostly to the right although sometimes to left a ping/dong/twang noise comes from...

hi guys im lokking to change my handbrake handle but dont know what ones fit. bought one a while back and cut off the old handle only to find the new one did'nt fit so ive had a mountain bike grip on there and need to sort it out!!

hi everyone just signed up thought id say hi an let you all know what im driving. my name is si im from taunton in somerset and i own a 55 plate 182 cup in orange have done for nearly 2 years and will make any excuse to go for a drive in it, the driving experience in this car is amazing. i have...