Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
My old sensor snapped off, don't no how but it did. May be I knocked it when I did my last oil change but it was still attached after I changed the oil.
Anyway my question is: is the old OPS had a gray plastic end and I have orderd a new sensor and the part no is 8200671286 and it's got a...
Powder Coating Racing Blue (paint code J45 Dynamo Blue) colour on my role cage. The people who have my role cage say they only do Ral/Bs colours for powder and its the same at every powder coating company.
So my question is what is the closest match to racing blue J45 dynamo blue in the Ral/Bs...
Are you sure there the correct size they do two diff sizes and they need to be tight over the arb. I have a full set on and its stiffer than the oem arb bushes.
The qauilty of it looks crap imo. Looks as ruth as a pensioners ass. You need to sand it all back down from 300 grit through diff grades down to 1200 grit and skim all those shocking undulations out and spray with high build primer and then sand down from 600 grit back down again repeat till...
Sold ones? But can't find were there from. http://www.cliosport.net/forum/showthread.php?678043-replaced-my-steering-rack-bushes-for-solid-ones/page2&highlight=clio+steering+rack+mounts
Hi,
I can't seem to find where to get uprated steering rack bushes.
Can somone do me a big favour and link me the company/website etc so I can get a set.
Cheers...
Then for the standard cig lighter I used parts from one of these with the existing standard cig lighter. I only used the red surround with the bulb holder with a white 286 T5 3xPLCC-2 Capless LED the rest of the componets were from the original cig lighter so that it retains the standard plug...
Yes you need for the twist nob heater controle 2x 509T twist lock holder. with 2x 286 T5 3xPLCC-2 Capless LED
You can only use red its the only colour that shines through the orange lenses in the heater controle. I did try blue but you can't see it at all it looks more like brown and then white...
The pictures are a bit blured, look mint in rl.
I changed my Racetech oil temp/pres gauges from the standard green to white to match all my other gauges etc.
I can do this for people if they send me there units.
You get it all from. http://www.crazyleds.co.uk/ ;)
You need for the dash top clock, temp, time 2x and twist nob heater controles 2x 509T twist lock holder. with 286 T5 3xPLCC-2 Capless LED for the dash clock, temp, time you also need to change the filter Translucent filter plastic 140mm x...
Re: Steering Wheel Sensors ABS/ESP/CRUSE CONTROLE/SERV LIGHTS ON AND ALSO HORN NOT WO
My CC light is not on, I was mistaken. It was ABS ESP SERV LIGHT ON, but my CC and horn does not work. I got a new squib with steering wheel angle sensor today from renparts for £54.50 daliverd. I hope that...
I PLUGGED IT IN AND IT SAYS STEERING WHEEL ANGLE SENSOR, SQUIB and brake peddle switch.
I have replaced the brake peddle switch but I still have the lights up. The ABS/ESP LIGHT WHENT OUT FOR A FEW MINS AS I TOOK IT OUT ROUND THE BOCK AS I WAS DRIVING DOWN MY DRIVE THEY CAME BACK ON.
My horn...