BT voyager 220 IP

[J273]

Does anyone have the above router and know the ip to configure it?

I cant for the life of me to get it to work nicely with vista through the USB so im gonna try the ethernet.


Thanks

 

[RobTQ]

As default I would expect the router to have DHCP enabled so just plug it into your PC via ethernet and it should work. If you really want to know the IP for the router just have a look at the connection details. The IP for the Default Gateway will be the IP for the router.

 

[J273]

Ok thanks ive gone through the ipconfig and the default gateways blank which must be the problem why i cant connect to it to configue it.

As anyone any ideas as to what the problem could be with it showing a blank default gateway?

Thanks

 

[J273]

Just got the pc with me now....Ive tried his router on my xp system and can connect to it fine and configure it.....But on this vista machine it just wont connect and always pops up with 'limited connectivity'.

Ive done ipconfig/renew and get

An error occurred while renewing interface loca area connection: unable to contact your DHCP server.request as timed out.

Heres what i get from ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : tina-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : NVIDIA nForce Networking Controller
Physical Address. . . . . . . . . : 00-1A-92-89-51-D2
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::95e6:5908:9b3f:4e29%8(Preferred)
Autoconfiguration IPv4 Address. . : 169.254.78.41(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :
DHCPv6 IAID . . . . . . . . . . . : 201332529
DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter Local Area Connection* 6:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::5efe:169.254.78.41%13(Preferred)
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip. . . . . . . . : Disabled

Tunnel adapter Local Area Connection* 10:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 02-00-54-55-4E-01
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Im lost now as to what to try next.

Any ideas guys?

Thanks