Diagnostics

[jamesd1263]

I've been told there's a way u can get a diagnostics display up on a Clio sport dash by putting the key in and pressing the reset button for the miles! Is this correct?

 

[vail3r]

Hold the button in and keep holding it while you turn the key in the ignition.

 

[jamesd1263]

What will appear? What means what lol

 

[blambert]

To access this, with the ignition off press and keep hold of the button at the end of the stalk and turn the ignition on. ALl the dashboard warning lights will come on and the speedo and rev counter will go through a predefined sequene.
When your doing this though (you can let go of the button at the end of the stalk) ever time you press the stalk button the digital readout will show information (listed belew) each time you press the button some more information will show.

All the lights lit (shows if you have a failed LED).

The amount of fuel left in the tank in liters.

Fuel flow (the engine has to be running. This is in liters per hour

Stored faults
t mean an injection fault has been detected for a minimum of 4 seconds
J means a fault has been noted on the fuel gauge. It must have disconnected for longer than 100 seconds. The resistance from the fuel tank sensor needs to be between 5 and 350 Ohms.
d means an injection signal fault has been detected
h means an oil level sensor fault has been detected.

If no faults are logged then dashes will show fixed dashes.
Press the reset button to clear the logged faults. Other faults arn't shown on the display.

 

[jamesd1263]

Cheers mate

 

[greggjones24]

How do you make this work on a mk2 ph1 1.2??