Fitting A Strut Brace!

[Sam]

Hi there. Got front and rear strut brace and just wanted a tip fitting.

The front one, i know you have to drill and that, but i was wondering if there is anything i should watch out for, or can i just drill straight through willy nilly or should i jack it up ??

The Rear one. Do i just undo the bolt on either side and put it on, then screw down. Does it need jacking up or what not.

The shocks aint gona fall out of place are they. Lol, Thanks!!!

 

[172Ben]

Of the top of my head there is nothing you have to watch out for when drilling through, cant be 100% though.

And yeh, undo the two bolts, as long as the car is on the floor nothing will fall out, fit brace and rebolt down

 

[Hutchie]

MEH just leave it on the deck and just fire away lad

"it'll be reet!"

lol

 

[1PBY]

The rear one is a piece of piss. Just leave your car on the ground, take caps off, pop it over the top on each side and place the nut on the top to stop it moving around. SIMPLE!!!I had one on my old car and im not convinced it did anything but looked cool anyway. Go for it!!!