Help with seats and wiring

[Sneak]

Just wondered if anyone is local to Maidstone with bucket seats

wouldn't mind having a look at how they are wired up with resistors.

Cheers
chris

 

[Bobby.]

Have a search on here mate, lots of pictures showing how the resistors go.

 

[l33th3tr33]

Have a search on here mate, lots of pictures showing how the resistors go.

I've had a look before and couldn't find anything, maybe I was just being blind. Do you have a link?

 

[Bobby.]

http://www.cliosport.net/forum/show...al-Aftermarket-Seats-Wheel&highlight=Resistor

http://www.cliosport.net/forum/show...-off-Serv-amp-Airbag-light&highlight=Resistor

 

[l33th3tr33]

That's great, thanks!

 

[Bobby.]

No worries.

 

[l33th3tr33]

I don't have a grey connector block on my passenger side loom, just the black and straight off to the pretensioner. Do I just disconnect the pretensioner clip and put a resistor in the end of that?

 

[James28]

I'm at uni but might possibly be able to help you when I come back if you haven't done it by then.

 

[Sneak]

Would be helpful mate.

 

[Sneak]

Please can somebody help me identify which wire is which? This is what greeted me when I removed the driver seat

 

[l33th3tr33]

I've done my passenger one now, I'll link you to the thread I used when I get home, but in the meantime, if you pull the black plug off the seatbelt clip and put a 3.3ohm resistor in the end of it then that stops the airbag light coming on.

For the grey plug on the right in that pic, I THINK! That it's the pink and cream/orange wires you put a resistor in, but I'll confirm that later.

 

[Sneak]

So... previous owner popped a resistor in the rear seat belt plug. Hence the "Trigger Line Configuration" issue.

No idea why you would need to pop one in there! Anyway removed that and no more disco dash

 

[l33th3tr33]

So... previous owner popped a resistor in the rear seat belt plug. Hence the "Trigger Line Configuration" issue.

No idea why you would need to pop one in there! Anyway removed that and no more disco dash

What did you do with your drivers loom? Mine chucks the light up no matter what I do, I've had to leave the pretensioner under the seat and it's bugging me. All the other 3 were fine, it's just the drivers side being an arse.