What is the OFFSET of my Mk1 RSi??

[sambo_clio_rsi]

As above, thats all im after are the vital measurements for buying alloys?

 

[Rich_16v]

Think its ET37

Centre bore is 60.1

4 x 100 bolt spacing

 

[sambo_clio_rsi]

Think its ET37

Centre bore is 60.1

4 x 100 bolt spacing

Ok, so will these fit in 14" or 15"??......
http://www.teamdynamicsracing.com/pro-race/Pro-race12.htm

thanks

 

[Rich_16v]

ET35 will be fine in the 15's

14's will look to small i'd say

 

[sambo_clio_rsi]

ET35 will be fine in the 15's

14's will look to small i'd say

But look on the site.... http://www.teamdynamicsracing.com/pro-race/Pro-race12.htm

Where is ET35 under 15"?

 

[bmh.01]

5th one down.

 

[sambo_clio_rsi]

5th one down.

Oh! Didnt see that one! Cheers!

 

[madhops87]

ET35 will be fine in the 15's

14's will look to small i'd say

yeah Sam get 15s!

 

[sambo_clio_rsi]

ET35 will be fine in the 15's

14's will look to small i'd say

Can i correct you on that one....my Maxpower Hanes Manual says all clios are ET 42? I wonder what my current OZ Ultra Leggers are as they scrape in my arches and only 16" n only dropped 400mm all round??

 

[sambo_clio_rsi]

^^40mm sorry!

 

[Final Maxim]

well ya books wrong, im pretty sure et42 would foul the inner arch at the front

mk 1's are 35-38

 

[sambo_clio_rsi]

well ya books wrong, im pretty sure et42 would foul the inner arch at the front

mk 1's are 35-38

Ok ideal cheers, so anywhere between 35 n 38 is good nothing over or under no?

 

[sambo_clio_rsi]

well ya books wrong, im pretty sure et42 would foul the inner arch at the front

mk 1's are 35-38

Will ET35 stick out more from the arches?