ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Recent content by stumac

  1. stumac

    Pistonheads Clio 182 article

    I know the mini cooper championship guys put scary high pressures in the rear tyres and they get some super fast lap times.
  2. stumac

    182 not turning over when hot

    Check you have the heat shield on the starter. i didn't have one and my starter used to get hot with the same symptoms your having.
  3. stumac

    Timing tool differences

    Are the genuine Renault Timing tools for the F4r the same for mk2 and mk3 Clio’s. I can get hold of a genuine set that I’ve been told are only for a Clio 197/200 but I thought the tools were pretty much the same for all F4r
  4. stumac

    NorthloopCup likes a challenge, right?

    Looks good, any reason you went for the Catcams solid lifters and not the ones from Pure motorsport as the PMS ones are quite a lot cheaper.
  5. stumac

    Engine rebuild

    You have http://racetechniques.com/home.asp in Cheltenham also. Ive used them a lot for bikes and cars.
  6. stumac

    1400 Tuning

    Have a look at http://www.xrallyparts.com It's in French but they have an English button somewhere. They supply maxi engine parts, I'm sure I read somewhere they they do a 1400 kit, they do have parts listed for the K4J though but its not cheap.
  7. stumac

    Surely these springs are too cheap?

    Cheap site that... LUK clutch for £73,.99
  8. stumac

    Green Track Cup - Back To Basics

    Speak to Quaife.... they were in the process off doing a sequential box using the standard gearbox cases. They were asking for knackered 1*2 gearboxes around a year ago so they could do R&D, don't know where they are with it now but it's worth an ask.
  9. stumac

    group N cam timing

    You might get more interest in the group buy for the timing tool now!!
  10. stumac

    SUPERCHARGED Alien Green 200 - PROGRESS TO DATE

    Have used Wheel Coat a few times now, pretty much always ready the next day and good communications. Quite a few Powdercoaters in Fife but definitely the best I've used.
  11. stumac

    First go with the flocking machine

    What machine did you use? I've been looking at buying one also.
  12. stumac

    Starter knackered??

    Thought so, will have a look for one. Thanks
  13. stumac

    Starter knackered??

    Recently started having hot start issues with my cup. Starts every time when cold but when hot sometimes just clicks away. Starts straight away if you bump it. Turns out there is no starter motor heat shield fitted, ordered one and it is on its way. Do you think the starter will be damaged...
  14. stumac

    Which cams?

    Can you still get the timing tool for Group N timing?? I know you used to be able to get them.
Top