Changing rear disks and pads, do i need to do anything differently?

[LB197]

Hi, I'm planning on changing my rear brake disks and pads on my 182, now in the past on all my other cars i haven't had abs or traction control, so ive been able to to change the disks and pads and not worry.
Now that I do have abs and traction control, do i need to get anything adjusted or reset once ive changed the disks and pads or is it just the same? Is just worth getting a garage to do it?
Thanks in advance,
Luke

 

[Knuckles]

If the 197s are the same with abs and tc, it's just off with the old and in with the new.

 

[The Chubby Pirate]

Nothing at all mate, although theres a washer that sits on the spline that you absolutely must put back on so note which way it comes off as its a pain in the arse sourcing one.

 

[LB197]

Nothing at all mate, although theres a washer that sits on the spline that you absolutely must put back on so note which way it comes off as its a pain in the arse sourcing one.

Great thanks, ill crack on with it then cheers

 

[scotiamr2t]

Often the washers are broken when you remove the disc, if this is the case the washers are available from @George@RTR_Parts who is a trader on here. TBH i would just replace them anyway for what they cost

 

[James28]

If you get a set of genuine Renault rear disks off Ebay it's literally just a straight swap over (plus the little washer things that have been mentioned)

 

[George@RTR_Parts]

These are the spacers that catch a lot of people out:

http://www.cliosport.net/threads/renault-spacer-that-go-behind-rear-discs-on-clio-172-182.712287/

If you haven't got the parts already , I can send you everything you need for the change; discs (Renault with bearings and abs rings fitted) , pads, spacers, hub nuts. Get in touch if need any help @LB182

 

[LB197]

Thanks everyone, @George@RTR_Parts i'll get in touch in the next week or so, thanks

 

[Turbo steve]

@George@RTR_Parts is your man, quality parts at a very good price.

 

[R3k1355]

Yep, for the money just buy a new set of spacers, don't even bother trying to re-use the old ones.

 

[George@RTR_Parts]

Thanks everyone, @George@RTR_Parts i'll get in touch in the next week or so, thanks

No worries mate

@George@RTR_Parts is your man, quality parts at a very good price.

Cheers!