Recent content by Adi316

Does anyone if you can run a phase 2 fuel pump with phase 1 fuel rail? Or will i have to remove fpr from pump?

I need some advice on fitting a universal swirl pot in clio 182. What size are the fuel lines/connectors that go into the fuel pump side and what type are they. Im sure i read once that they are 8mm and are m18 type connectors? Or am i just makin a load of bull up?? And also would i need to run...

At three sisters testing 182 after fitting phase 1 fuel system and high pressure pump. Im guessin shes suffering from fuel surge every lap after the hairpin.. there was well over half tank fuel in. Just wondering if its definately fuel surge and what would be cheapest solution. Swirl pot? Tank...

On a583 near kirkham

Lol yeh sorted but might get a new sensor neway

Thanks

Switched the wires to adapter this morning and she starts up n runs no problem:smile:

Yeh took mine off this morning, found that the clip off the adapter was broken and wires were abit loose. So i cleaned the sensor and took an adapter bit off a megane and put that on but couldnt get car started at all now. Do you know if it makes a difference which way the wires are connected at...

Yeah ive seen quite a few and they vary alot in prices.. cant be just £80 difference for adapter

Thanks

Any1 know the part num for crank sensor?

Yeah i dont think the fuel is causing the issues.. myb lose a hp or 2

To the shelf life

Interesting read that.. although iv had cars off the road for longer before and they fire up and run no problem. you think it running on v power makes any difference?

Thanks. How would i go about checking these things? Or would i just hav to replace and try?