Recent content by Del Boy R

I can feel it spinning at the bottom so it must be complete? But I will check this! I suspect once injector changed it'll all be ok as the others are tight.

Yes one of the 5 bolts at the front. The middle bolt to be precise! I've put the gasket back on, it's all fine (well I won't 100% know until a new injector, it is idling slightly higher than normal).

Ah... just fixed it. It was as many might guess an "air leak" The middle bolt from the inlet plenum won't tighten, so any ideas how to fix that would be great. Thanks again.

Hi, Need some advice as I'm stuck as to what's wrong. Whilst taking the top of the engine to bits to change the sparks and test HT leads, having put it all back together, when I start the engine it goes straight to full revs! Any ideas? I've tried cleaning the throttle body, it doesn't stick...

Hi all, Long-time lurker here but need a few bits of advice. Got a 2005 182 and the 3rd injector is showing 4Ohms vs 14Ohms for the others. Does anyone know the best place to get a replacement? Thanks, Del Boy