Recent content by He B TeMy

If that's the case, i guess you have an issue with your stalk, taking it out is only 2 screws with 2 wires, something to try i guess, easy access.

All the time? Even if no headlights are on ? Tried to move the left lever (like turning on and off) ?

I hope you didn't push one pin of the headlights when inserting the connector, i did that once, the sidelight was the only one that didn't work, ended up returning one to autodoc as damaged, and only after i checked the connector and saw that one side was kindly bent, almost screw'd the...

Well, i think i solved the issue, i had to loosen the right-side bolt (close to the ignition that was holding the steering wheel higher up, basically loosening it let it slide back 2cm and then tighten it again. Removed first the top dash which took some more work... but it was not needed. I'm...

Hello, sorry to bump, Tried to do this today on a dci 04 plate ph2 , is the steering column different or am i doing something wrong? The spacers go in the vertical holes right? Because only one side lowers when unbolted, the other side is fixed. Basically the difference lowered with only 8mm on...

I got one from aliexpress, you'd have to remove the plastic below it, feels somewhat different, but been running it for years and never had a problem, nor has it faded/chipped away.

Fortnite is a crap game to test a GPU, it's CPU-BOUND, and you would not see a massive improvement in performance upgrading the GPU ONLY. GTA-V is also not a good example to test, but you should get around 100fps or so, although if it's GTA-V online there has been reports of massive FPS-DIPPING...

Just did this in my clio the other day! Went for the small upgrade option; Did not buy an ALPINE UTE-92BT or CDE-178BT because i could literally not find them anywhere, even remote places internationally, nobody has them on stock, sadly? or not i guess. Pioneer S520DAB (155€), great little HU...

Yup, now i have a bad wheel bearing on the rear just last week.... GL to me i guess XD , gonna try to change it.

With the wiring only no, but the wiring was causing an "open circuit" permanent error , so they had a problem, probably passenger side from what i saw when i went to fix the connections. But i had an issue with the clockspring which needed changing and i did change it, (it had one of the two...

Disregard my post above, There is a bit of plastic (the other end) that is the support for this spring, there's no zip ties needed, it fits perfectly. To put the spring there, i had to force the spring down, hold it with one ziptie (ziptie is strong asfu**) , then put it in place with the...

update: drivers side: passenger side: I ended up soldering up 1 connection on each side (1 was already tied up together on the passenger side, and i cleaned it up a bit and made it nice. I only left out one connection on the passenger side which seems in good condition and has no cable...

Can someone help please ?

Hello, I got the serv + airbag lights on as far as i can remember, managed to turn them off like 2y ago for a couple months by cleaning the contacts but they came back, went to a shop and they said it was the airbag module which i believe is expensive to replace... but the thing is, now that i...

No one done it from digital to manual ? :p , probably too much trouble, i just like the manual gauges ;))