ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Struggler's latest activity
-
Struggler replied to the thread Ph1 revival.Short update and unfortunately not a good one. I was a bit concerned how much it was chuffing out the oil breather when I got it started... -
-
Struggler replied to the thread Ph1 revival.I've shunted to the perm live. bridging to the switch could draw too much current for the wiring and blow a fuse. I turn the battery...
-
Struggler replied to the thread Ph1 revival.The bodge is still there. it basically bypasses the relay and provides a permanent 12v to the coil pack. To be honest, it may remain...
-
Struggler replied to the thread Ph1 revival.please can a moderator remove the video under attachments, it is not supposed to be included.
-
Struggler replied to the thread Ph1 revival.SO! a small but far from insignificant update! After getting the engine back in and wired up I did some cranking to circulate the oil...
-
-
Struggler replied to the thread SPA Oil Temp & Pressure Gauge Installation.Another big bump for this thread. I was having a thunk the other day when I cranked my engine on the stand with a drill to circulate...
-
-
Struggler replied to the thread Airbag Module... Handbrake wire??.Digging up an old thread. I don't have the wiring since I stripped it all out but have the stop and handbrake light on. Maybe I...
-
Hi Everyone, Seem to be having a spot of bother getting my track car started up after a fairly large overhaul this summer. Signs are...
-
-
Struggler replied to the thread Dieppe to Dallas - Photos of the Texan owned Ph1 172.Every time i see this thread i wish the title was "Dieppe does Dallas". Truly wonderful stuff though! keep it up.
-
So! Rebuild complete and engine back in the car. Obviously it didn't start first time that would be too easy! So putting together a plan...
-
-
Struggler replied to the thread Steering column mk1.Shouldnt need a puller to get the old boss off. Put the main T45 bolt back on a few turns followed by the steering wheel then just...
-
Did a little search on this topic and coudnt find anything. The PMS shifter comes with a slight angle in the shifter: Is this angle...
-
-
Struggler replied to the thread Alternator exciter wire, which pin.c'mon gang! surely someone can stick their head under the bonnet and see which pin the wire goes to!! would rather not flip a coin on...
-
Struggler replied to the thread AUX belt not lining up pas delete.Getting real good at digging up old threads, can someone share the belt size you use for this set up? I have something similar on my...
