ClioSport.net

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Search results

  1. N

    Mondial 172 Cup OEM+ / Rolling Resto

    Looks good, I'd just leave it as you say and get them to finish the outside 👍
  2. N

    The VW Audi Skoda Seat Thread

    How is it? Is it 4wd
  3. N

    Jim's Black Ph2 172 (Just like everyone else's!)

    Straight into the job that puts you off the most, ear pods in and away you go 💪
  4. N

    What's your favourite car related YouTube channel?

    Professional struggler, not much on cars but does a lot of fu£ing about, if i had a bit of land and a large shed I'd be doing the same sort of bodgery fun
  5. N

    Clio 182 lumpy idle???

    Best check the carbon canister is fitted and working fitst, my 172 is lumpy ish when warm too, no codes and timing is fine, its always been like this since I've had it. Think the 182 has better map on the ecu from new which stopped the lumpy ish running
  6. N

    Potential coilover issue

    Standard shocks and springs would be faster on most roads I'd imagine, them things will have you bouncing all over the road
  7. N

    Arch Liner Alternatives

    Any mk2 one would work, just a little narrow so would need an extension pop riveted on, it would be the easiest option to work with
  8. N

    Home Broadband Recommendations

    Im EE fibre 200 i think it is, they set it all up but you need to call for a good deal, wont get a good one online 👍
  9. N

    Clio Rescue Centre

    Belts too short if its not going over,you shouldn't need to wedge any auxiliary belt on anything pal
  10. N

    Sticking caliper?

    Sliders pins are/or the pad carrier is worn, grease wont help. Try a new slider pin kit first, likely originals still fitted
  11. N

    My cheap(ish) 172 Cup

    Just check the rear pads are fitted correctly, with the tabs on the rear of the pad located within the piston grooves
  12. N

    Clio Rescue Centre

    G Get your finger out 😂 changing a turbo over doesn't take that long, can do that in a morning mate. Purchase something low mileage and reliable, easier to pay a small loan every month than unexpected failures that cost a fortune if you can't do it yourself/have the time. Saying that a good...
  13. N

    Clio Rescue Centre

    Sell the lot and buy something working and good to go, try another brand might be the way ahead
  14. N

    3,304 days ago since I owned a Renault ..

    I used blue steel and hammerite on my old discs, I'll be coating these the same in the coming months
  15. N

    3,304 days ago since I owned a Renault ..

    Make sure to coat the discs prior to fitting, my genuine discs look horrendous within weeks
  16. N

    Humming noise whilst driving Clio mk 3

    Sometimes the play is that small that you can't see it, needs checked with run out/dti gauge, I had same issue on my megane, it was the front wheel bearings with zero play 🤷‍♂️
  17. N

    Chris's 172 Cup Turbo

    Great choice, they are a big upgrade from the clio, im sure you'll enjoy it 😁
  18. N

    First Car Project - Clio 172 PH1

    Get it on axle stands and take the subframe off is what i done, its not hard just awkward as is everything when working on the floor, yiur young so will be much easier 😂🫣
  19. N

    Kangoo Compact (aka Racevan3)

    You could cut the stub axle from an r26, get a local fab shop to weld them to the kangoo axle, that might be the easiest option
  20. N

    Kangoo Compact (aka Racevan3)

    Sorry I've wrote that like a mong, I was asking same thing 😂 are the stub axles different
  21. N

    Kangoo Compact (aka Racevan3)

    The r26 stub axle, is it different bolt spacing compared to kangoo
  22. N

    Rojer's 200T

    I might get them instead then 👍
  23. N

    Rojer's 200T

    Oh dear 😂 they last longer upfront 🤷‍♂️ two trackdays is very little mileage, weird
  24. N

    Rojer's 200T

    Im going for bluestuff on the back of my megane, more than good enough for the job and wear well, £100 to your door which helps too
  25. N

    Removing pollen filter cover rivets

    Next time put a screw into the centre of it and pull it out if its stuck, it'll save your plastics 👍
  26. N

    Titanium shims

    Yeah its not cheap, two titanium bolts a guy showed me at work for a specific task, m20 x120mm or thereabouts, just under £600 quid he said 🫣😂, there kept in a locked drawer incase they go missing
  27. N

    Titanium shims

    I've ordered a set from rival performance 👍
  28. N

    Titanium shims

    No I've never boiled the fluid, currently have rbf600, I never put ducting on the clio and the brakes were getting too hot and retaining heat, so this would be a must next time on both cars. The main reason for me was to protect the calipers, as the clio seals are pretty much knackered although...
  29. N

    My cheap(ish) 172 Cup

    See if you can find a scrapyard not far way to help yourself to some bits such as the rubbers, some breakers on ebay may be local too so worth a look, although the mk2 is now very rare to find over the past 2yrs or so for scrap, very thin on the ground for parts it seems. Our local one is mainly...
  30. N

    Titanium shims

    What size ducting is good, 3inch or so? I plan to tie wrap it under the splitter up to the disc area, again this will be fitted in the morning and removed before I head home, maybe not perfect but it should help a little
Back
Top