Search results

Oldskool 6” Record. Its took everything ive thrown at it, put a slight kink in the bar with a 4ft scaf pipe on it, absolutely solid

Comes out the top on a dci 65. Use a 6 sided socket on the nuts holding it to the manifold, as the bolts round off easy

A bit fiddly but not too bad

Turbo seals are on their way with that much oil in the egr, keep an eye on it or could cost you an engine if it starts running away

R5gtt wheels wont fit as the kangoo brakes are too big. 4x108 is wrong pcd so no chance. Any 4x100 15" wheel et35-43 with 60.1mm centrebore will fit no bother

What wheels are you trying to fit ? Most 4x100 will fit on the front without hassle

You will need hub centric spacers for the back

You can get keys programmed no problem if you want a spare.

You dont need the decoder ring around the ign. Just matched key, uch and ecu. I have a cup ecu and uch with matched key here, uch has a fault saying rear door is open all the time but apart from that works ok. Cheap if you want it.

Matched Ecu, uch and key is all you need. You could get the imobiliser reset on another ecu to plug into your current key/uch aswell.

Cup rear shocks are shorter which will sort your issue, had the same problem on aftermarket shocks

Elongate the shocker bolt holes its cheaper, as for setting it up do a bit of research on how camber will affect handling

Squirt some spray grease on the shaft

Gtechniq wm2

My Kangoo with 172 conversion does 40mpg on a run and mid 30s around the streets, reasonably economical for a 2.0 Gearbox probably needs repair if no 5th gear. 6 speed wont fit without a fair bit of work, custom driveshafts etc.

Tow bar wiring probably tapped into rear cluster, follow wire and remove it at the source.

@Austin-182 get booked up

Will do mate. Kangoo is on the road use it quite often. Extra will be back on the road soon too if all goes well.

New rings on the pistons yesterday, clocked and fitted to new liners. Bought a wiseco tapered piston ring compressor which works awesome compared to my old clamp round one. Painted the rocker cover vht wrinkle black. Turned out ok could do with another coat though, will revisit when i order...

Lube her up never go in dry;)

Eibachs have made a massive difference to ride quality. Clutch next weekend, not really looking forward to it however have put it off for last 12 months :cautious:

Take it to a decent mechanic/renault specialist who knows what they are doing, otherwise replacing parts at random will run into money.

Boot/bush needs lubricating on the lower part of the steering column by the sounds of it, get some grease on it

Extra van update. My old rocker bar is quite knackered after years of high rpm so have decided to try out some upgrades this time round. I had seen phosphur bronze rocker bar spacers to replace oem springs, for less friction and less chance of rocker moving at high rpm..cheap too so took a...

Cheers mate (y) mrs is quite keen to get stuck in on the new engine build. Ill teach her how to do it then i can get my feet up in the future whilst she does the graft ;) Kangoo update. Rear doors have had a bit of rust above the plastic trim, which was not too bad but let it down a bit. Ive...

Great vid, Tiff Needell can certainly peddle it, was watching the old 1989 top gear episode where he was driving the rs500 cosworth the other day.

The ds1:11 are awesome on the megane, i bet you can stand it on its nose with them on the clio

Looks great in the pics, sounds like an honest gtt from the previous couple of owners.

What about something like this to replace oem aerial, will do both normal radio and dab https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/323566414237

Injector as said a load of times above, one will be knackered with flashing eml