Search results

also they are called 'guide pins'

yes both should move freely. get them out best way you can and buy some new ones (they are cheap). Use high melting point grease when you put the new ones back in. If you use the original ones, they tend to rust up again pretty soon from what iv seen on mine...

it really is pointless as the wheel base is all wrong etc

you joke C.J. surely? lol

coilpack or MAF sensor?

awsome!

as title? Was the first trophy i have seen in real life, the color is sooo much better in real life! I want one!

it might be that the bitrate has been reduced on non-hd channels to allow room for hd channels on the same transponder.

bump, anyone got any ideas?

its hard to hear the sarcasm from just text... :p

I cant belive im reading this?! IMO, the Toyo T1R's are better than the Pirrelli's I have on the 182 at the moment, but unlike the pirrelli's, the PSI has to be kept down to around 26, which mean less MPG. The T1S was even better, but they dont really do that tyre anymore. Both the T1R and...

:S think you may have missed the bit about Ubuntu...

MyCarCheck, also availible on Android :)

if its just for internet and images, then this Zoostorm is must better value imo http://www.ebuyer.com/344622-zoostorm-desktop-pc-7873-1057 It can be loaded with Ubuntu for free, or Windows 7 for a fee. For images and internet, ubuntu is perfect :)

Look at the Zoostorm computers on ebuyer, they are the best value for money and are cheap enougth to allow a decent monitor, keyboard and mouse to be purchased along side for under £400 easy.

lol I wasnt expecting that result! Thats actually a really good photoshop! Unlike you first post, which is just utter crap tbh! lol. Well done :)

The rear drivers side window (manual wind) on our TCE keeps dropping about a 1cm, so its just open. It only appears to do it when the door is open and closed (the vibrations mayby?), does nayone have any ideas of what can be done to stop it dropping open?

I found it easier to pull the grommet into the car side, use a craft knife to cut off the rubber section that most raised, which then opems up about a 10mm hole to get you cable through. when finshied, just push the grommet back in... :)

no

when it stalls it will sound like its sucking a lot of air, thats normal. Check the connetions to the trottle body sensor, MAF sensor and the coilpack LT connections. Spray some electrical contact cleaner on 3 of these and see if it makes things better. It sounds like your cleaning the throttle...

When you burn the CD in windows, make sure you select 'in a cd/dvd player', else it will create a 'Live' cd which wont be readable in you mp3 player. This is where most people slip up...

lol at this. theres a guide on here and everything. Why would you remove screws and expect it to be ok?! Almost everyone just cuts notches into the splitter to go 'around' the screws.

182's have electronic throttle, should they not do the same? :S

climate control etc will be fine (including the clock and temperature display). I took the dash of to route my cable (I drilled a hole in the side of the glovebox), but its also possible to run it via a panel at the back of the glovebox if your cable is long enougth.

Looking good Ron :) Still the best colour imo, even though some people on her think its the least desirable! Mine really needs a clean+polish like that! p.s, i want your splitter!

if both the ps3 and pc are restarting, it *could* be short power outtages, but that is unlikely. I think you need to start again and try to explain the problem a bit clearer including how things are setup. What have you got plugged into the PC? are there any extra PCI cards inserted? First thing...

6th with no revs? Now thats hard to believe! You must have epic clutch control!!

perfectly normal for it to be light, id be worried if it wasnt on a 1.4!

yep, and it would be very slow progress of course

id believe them. As the 1.2 TCE manages to pull away in 5th, I think the 200 would do it in 6th.