Search results

Well finally sprayed the plenium :D was polished when i got it off ali and tweaked by ben r but it didnt fit ali's motor so now ive got it :D i tidied up the polishing and sprayed it yesterday, it just needs a polish on the letters and a quick touch up :D hope you likey andy

got all the yellow bits finished and on the car :D shud look good for fcs big thanks to mark for the spraying, and the constant respraying of the side badges lol :rasp: i know there not to every1s taste but i think there sweet :D and one of the bum:

you were in the leisure centre carpark :)

saw it in the union car park, irish plate DEZ ***9

sheesh :D http://www.renaultsport.co.uk/community/forum/topic.asp?TOPIC_ID=4530

Twas a fine day yesterday so got me calipers painted :) im liking the yellow, took me pretty much all day cos i did three coats of paint :S stage one in the preperations for fcs is now complete :D heres one b4 shot cos they all pretty much look the same lol: A front and back after...

i always get loads of fooking pop ups on my comp! where can i download a really good blocker for free? cheers

Saw the flame red doing stupid overtakes down the bypass and saw the silver at the roundabout near b&q the silver looked sweet with a nice twin exhaust

as above! putting my serious performance order in this week, was going to go for nattys blue to finish off with but after reading lots about p21s should i be getting that instead? cheers andy

need to tidy up my calipers, any suggestions for caliper colours? im in a racing blue with athracite wheels im tempted to stick with a bit of black hammerite but what are peoples thoughts on other colours? cheers

i do all the usual wash, clay, polish, seal and wax etc etc i currently use #476s collinite which is excellent and has done me proud throughout the winter im basically wondering if there is a wax which will bring up a nice shine and deep rich colour to my racing blue??? cheers andy

mine: http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=8054005124&rd=1&sspagename=STRK%3AMESE%3AIT&rd=1 :D

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=8054005124&rd=1&sspagename=STRK%3AMESE%3AIT&rd=1 :D

just drove past you by the fire station, you flashed yer lights and i waved! now i know you aint drew182 cos his is a 55 plate, who are you lol :D also a 51 plate flame red :D

passed you at 4.30 monday afternoon, you came out of the quarry/mill place near junction 17 heading for congleton i passed you as you came out, gave a wave and you did to :D

since i last posted a pic up i have sorted out the cold air feed to the viper and started to polish up the frc and the inlets :D the frc and inlets still need a lot of work doing on them but im happy with how they are for now, untill we get some warmer weather (feels like my fingers are going...

followed me into congleton 05 reg :D

im gonna be giving my engine bay a good clean and im not too sure what i should be covering up with bags to protect from the water? im taking the battery cover, engine cover and strut brace off to clean the bay any help would be appreciated :)

went on a secret mission to carlisle today (about 250mile round trip) and got the best mpg ive seen out of my 182 :D 38 MPG !!!!!!!!!! was well chuffed, i lost site of the 30MPG mark in january when i fitted the viper but the constant speed of 85 let my mpg creep up to a record (for me) 38...

as above, is there a torque setting for the inlet plenham cos i am taking it off today to give it a polish :D

what type of paint should i be using to paint my inlet manifold (plenham) ideally i wud like to use a spray cos i think i could get a better finish, i just need to know what sort of paint will be ok seeing as it will get quite hot? cheers andy

when i change my tires over im going to get the power washer out and give the arches a blast, is there a good product that can apply/spray on before i blast them to loosen up all the grime? andy

After the badger baiting incident 2weeks ago today, i have finally got her all fixed up again! :D Needed to fit a new radiator and fan, fit the new bumper and while i was at it i put in the cold air feed for the viper big thanks goes out to all those who helped out in sourcing parts and...

picking up 1.5m of 70mm alloy piping in black to use for my viper 2moz. im going to relocate it to behind the grill seeing as i will be fitting my new bumper and will already be taking it off. i dont want to lose a foggie so was just wondering whether to go stealth and fix the end behind the...

came up my arse whilst i was changing me cd so pulled on to inside lane and you flew by :D

http://cgi.ebay.co.uk/2002-RENAULT-CLIO-RENAULTSPORT-172-CUP-BLUE-V6-BODYKIT_W0QQitemZ4614633301QQcategoryZ9861QQrdZ1QQcmdZViewItem

opinions please! currently polishing up the frc and manifold plenham. dont know whether to stick with the carbon cover or paint my oe cover? also not sure what colour to opt for if i was to paint the oe one! also if i do keep the carbon cover, im weighing up whether to cut a hole to allow...

still gutted from the badger incident so started some polishing of the insides seeing as the outside is battered lol got the main bits done but will have to concentrate on the finer scratches when ive done the plenham as well :D btw i know what guys and carbon were on about with the...

does anyone know how much one of these is? cheers andy

as above is the only difference the lack of a splitter on a 172 bumper?