Search results

Got two letters yesterday so i suppose i better book them in. If they want £95 per car i shall be fitting aero catches or similar as they will last alot longer.

Cleaned the TB?

Do not update it to 8200 it will not work and will cause problems!!! You need to contact Henk as you will only need a CAL file 7300_5e11_ron98 , the RST software does not need updating you just do a straight re-write of the CAL file :D You can only update i.e 8000,8100 > 8200> 6400 > 6500...

Very nice!! Good to see something different:cool:

Can't make this meet even though i can near enough see it from my house. Good luck trying to park lol it is horrendous!! better off parking on B&Q and walking over. The Carvery is pretty nice for the money;)

My superleggeras are 67.1 if that helps

Tbh it will be worse than that pretty soon. Mines near enough matt finish now after snow ploughing with it. Take it off and give a few coats of lacquer

702 second guess

As above accessories/auxiliary belt

Good stuff, Be careful not to pop the passenger shaft out when doing the front;) or you will end up with 3 litres of box oil on your drive.

^^Looks good that! Bit of pritt stick and cling film= jobs a good un

Hi Dave :) Did you sort your shock bolt out in the end?

594

Magneta motors on bridge street wednesbury, Done a fair few bits for me and they also paint TCR's Clio cup racers. But tbh i would try and source a boot lid.

Decent little thread about two folk who had the same problem as you. http://www.cliosport.net/forum/showthread.php?615133-Reverse-Loud-Knock&highlight=reverse+loud+knock

Iirc he is racing in the clio cup for TCR in wednesbury.

It will be a faulty pedal switch.

Bargain:)

What ed55j said Plus if it is the new style tuner the map will not be compatible... And anything with 6500 *** *** won't work it needs to be verified. Did it say caution or ok? is it unlocked?

Iirc the old versions have to be sent back to Henk@Fastchip to get the firmware updated/unit exchanging. I think its the new ones that are up-datable by the user. Firmware 1.83 onwards??

What Chip said, you will need the upper gearbox mount and they are weaker too. You may also need the bracketry and dog bone mount from the mk1 as i don't think they have the threaded hole for the smaller end of the ph2 twisted dog bone mount. (maybe wrong but its been a while since i looked...

Change to 4th

Yep stiffer sidewall

Have search its covered daily.;)

;)

You must refit the little washer behind the disc. And torque them up to 175nm

Headlight self levelling thingy, yep it should be attatched

I slapped the relays and it started shall sort it out tomorrow when i have more time

That car in the second picture looks s**t lol. Stick with the one you have

Also gets my vote^^