Search results

Both just in case 😂

That or the high speed one if you don't quite need the torque. https://www.powertoolmate.co.uk/power-tools/milwaukee/cordless-wrenches-ratchets/milwaukee-m12fhir38-0-12v-3-8inch-brushless-high-speed-ratchet-bare-unit.htm The head size is smaller on the high speed too compared to the other.

Gen 2 stubby coming soon.

Yeah they won't be cheap.

Yeah i'm not sure what's happened but my mate said the same the other day. Suspension Secrets are meant to be very good, always see them at RMA trackdays and doing Porsche stuff.

7700414103 is the part number. Jump on Autodoc and grab one, just make sure you get one WITH the dryer included.

Yeah that's decent tbh. Same size as the one I've got from Vyair. What resin is that MB115 or 151. 151 is the one you want really, lasts longer in hard water areas and would last ages in soft water. How long it lasts is pretty variable, but you should get at least a year if using every...

Autosmart Prestige XLS works well on proper dirty stuff, just have to watch out for it drying on.

It's basically the original qd with the protection/slickness of Pure.

Surfex HD mixed as strong as you want?

Have you tried Gyeon's Ceramic Detailer? That's properly slick stuff and beads well for a few weeks after too.

Looks a decent list. No experience of the Poorboys shampoo, but their stuff is generally good. Carpro Reset is the best i've used, even the 500ml will last you ages as you only need 2-3 caps in 20L bucket.

I'm sure it'll be fine if it's working on low speed. If you're ever around Warrington i can test the high speed function for you with RSTuner.

Does it come on with your AC? It should be.

Yeah too much and you'll get poor combustion.

No, just a guess. My Megane is gapped to 0.6mm so just saying it's no point going further than that. It's worth noting that the electrode will wear away and the gap will open on older plugs, so you may as well check the old ones first.

I would.

Sounds like a big gap considering the increase in power/boost. Worth gapping down, try in 0.1mm increments and see if that sorts it. Wouldn't go too far though, 0.65-0.7mm max.

I'll do it if Jon is busy 😂