Search results

there are a set on ebay at the min, well 2 different seperate listings but thats how i got mine, http://cgi.ebay.co.uk/SPARCO-PRO-2000-SEAT-RACE-RALLY-TRACKDAY_W0QQitemZ280146836640QQihZ018QQcategoryZ30172QQssPageNameZWDVWQQrdZ1QQcmdZViewItem...

http://www.motorsportworld.co.uk/ Manufacturer :Tarox Category :Tarox Discs - G88 - Front Sub-category :G88F - Renault Application :Clio 2.0i 182 03> Product Code:TRX-1529G Details dimensions = 280x24x44mm Price:£153.34 inc VAT Delivery:£12.00 if that fella can get them for £100 thats...

taken from the tarox website;) Q. Which way should the grooves face on a grooved/grooved & drilled disc? A: In the case of the G88 and Sport Japan discs the grooves should radiate outwards towards the rear of the car. A C83 disc should run in the opposite direction. For further info see the...

np mate, commen mistake. also was gonna say brakes will be w**k for a few 100 miles due to disc and pads having to bed into each other so dont expect them to be super first off, took me a good few months till i was happy with mine ( my old setup was exatly the same as yours, g88 disc greestuff...

discs are the wrong way round mate but looks good:)

mine weigh 9kg's each, my std leathers weighed 15kg maybe abit more. fitting mine was'nt a problem as i used subframes. u can get lighter seats but then need to use sidemounts, i like the adjustment as im a lanky b*****d.

few more seat pics for you fella:D

lol its not a replica, it does'nt have the stickers;) i never intended it to look like a williams i just think the gold speedlines suit mk1 valvers/williams down to the ground hence why i have a set, same story with turinis and mk2's. the wheels are the corret colour ali thank you;) ive had them...

few more of midges....

went round midges yesterday to help him refit his carbon bonnet, turned up to find out his gone shopping :rolleyes: so i pulled out the camera and took a few snaps while i waited:D ....

http://www.youtube.com/watch?v=vKIA0WMXVA0

awesome pics:D i can't wait to do the rs one in september again:D

some good footage of you here gweebs:D http://www.cliosport.net/forum/showthread.php?t=246085

thats was gweebs in the black 182 maz, and it was lap 5 i spun pretty boy;)

yeah sorted it on sunday when i got home cheers maz:D . Damage was 2 broken mounts and a seized rad fan( why that went i have no idea ). i spoke to renault on monday and asked them how the mounts are made, they sent me these : stage 1 in its purest form : stage 2 going into production at...

awesome vid mr northy:D lol that tyre did smoke up abit, i see you coming up and thought i best get out the way sharpish;)

few pics from the williamsclio stand at fcs..... did'nt take too many but here goes... thats me in the last few pics after spinning off track at about 90 ( think gweebs had a full view lol ) damage was 2 cracked mounts and a seized rad fan , poxy mounts made...

looks nice, did it get put on the rollers?

who checked your alignment? did they adjust anything? ( tracking normally cost £30-£40 )

Drill, ive had to do loads and leave mine out as its so much hassel trying to remove them. get a good 240v drill with a decent metal cutting bit and each side should only take 15mins max to do.

there will be 4 nuts holding it to the chassis, undo them and beam drops down, remove shocks first, remove handbrake cables, might have to undo rear brake pipes think thats it

if the car runs striaght but the wheel is off centre, take it back to the place that done the tracking an get them to redo it ( will be free ) but make sure they clamp the steering wheel in the centre position. this is more than likey your problem

it cost me £120 to have 6 dents taken out, he normally charges £40 per dent but as i had them all done he done it cheap. i can put his number up but he is based in south east london so im not sure it would be any use... let me know tho if you want it.

lol opps should of worded that better, ment to say thats how a bought the car and used it to knock money off:D

thats how i got the car fella, do plan on getting it smoothed over when i can be bothered, but for now thats how it stays.

for now lol. finaly decided to get the 6 dents in my car taken out today, had 2 in each door and 2 on the rear passanger side wing, one being rather large :mad: pretty much ready for fcs now( well apart from a stonechiped bumper and bonnet :rolleyes: ), gotta pc the car in the week and give the...

will look good fella with the seats in:D i look forward to seeing you on track;)

not bad fella, sounds nice:D next time try and stick the phone ( camera ) inbetween the top dash and steering wheel surrond so its held stable. thats how i do mine http://www.youtube.com/watch?v=vKIA0WMXVA0 done on an unrestricted part of the autobarn;)

i know midges hybrid like the back of my hand and u won't need to do a thing to it for it to pan a 180 gti, its running a std 2.0l with 7k limit but weighs f**k all ( about 850 kg ) runs 14.1 @ 98 mph qtr mile, doubt a 206 gti 180 would even manage 15's...

discs are drilled and vented, not the my personal choice but came with the kit. they do have a 1mm lip on and need changing soon but im having trouble finding replacements....