Search results

Well its cost me a fortune, but ive got most of the stuff done on my williams that i wanted to in order to sort out the handling: Rear shocks Front shocks Front springs Top mounts Track rods Tyres Wheel balancing Tracking Steering column welded Front disc and pads Rear pads...

What is the top price for a mint Valver? If its totally standard with say 70,000 miles.

clear your pms i cant message you.

How do i get the engine bay as clean as possible? What products are good? Any tips? Anyone got a touch up pen for the wheels?

The polysport bushes do not fit the williams atall. I have checked with them and they are the right codes, but they do not in any way fit on a williams (not mine anyway).

Whats the sticky tape (double sided) that hold trim / spoilers on clios etc called? Where is best place to get it? I need some for my spoiler and trim.

What is the best thing to do about the wires for the rear wiper motor and the water supply? I have a fully functional working tailgate on my williams with a parking dent, and one i have just picked up ready to go on. The wires and water supply have been cut for obvious reasons. Anyone else...

I just bought a SS exhaust at a resonable price (second hand cat back). But im not sure what kind it is. The guy that sold it thought it was scorpion, but im starting to think its magnex. The back box is oval and sit horixintally (ie thin part of the oval from top to bottom, wide part side to...

Is the williams glass slightly smoked? Something looks different between my williams and the back of a valver, but i cant put my finger on what? I know the spoiler is different.

I am going to pick up a phase 1 valver tailgate tomorrow from Paul Mitchell. What do i need to do to attatch it to my williams? Ie what tools? DO i just bolt it on? Also apart from the williams sticker, is the tailgate identical to the williams one?

I have a very slight whisteling noise comming from the manifold / downpipe area. I have spoken to a number of willy owners on here about this but just want to throw it out into the public domain to see if i can get any further ideas. The car is going into the garage on monday possibly to weld...

What will happen if i put a decat on my williams with a standard exhaust? I heard it may decrease the length of life of the exhaust? Cheers

Go out and wash the salt off your car. Splash a bucket on the allloys and one under each arch. If you dont think that salt is that bad, consider that they cant put salt on runways because it damages the planes. IT WILL EAT YOUR CAR.

If the following cars were still made as brand new (with warantee, etc), by the manufacturers, would you buy one of these (if so which one) or go for one of the present crop of hot hatches if the prices were similar: Mk1 Golf GTi Clio Williams Valver Pug 205 GTi Renault 5 GT Turbo...

How much will a williams sticker for the tailgate cost me?

Can i fit polyurethane bushes to the wishbone of my williams, and polyurethane to the inner antiroll bar, but put rubber on the outer roll bar? I have the polyurethane for these but the company doesnt do the outer antiroll bar in the shape i want. The price is pretty much the same but i couldnt...

Would a leak of gearbox oil from the bearing on a driveshaft reduce performance atall?

On the end of my anti roll bar in the bush. The bush fits OVER the antiroll bar and then a u shaped clip attaches it to the antiroll bar.Now polyspot sent me polyurethane bushes that seem to bear no resemblance to the original bush. The ones they sent attach via a bolt which fits inside the...

According to the garage trying to fit them the polysport bushes i have look too big (compared to the standard rubber ones). Rallydesign assures me they are the correct ones. Anyone shed any light on this?

What should i expect to pay for rear pads and discs? I beleive the bearing needs to be done with the disc? Help asap before garage rings back would be helpful. Cheers

Just had all the dash off to grease the speedo cable as its jumping a bit at low speeds on my willy. Got it all off, but to be honest didnt really know where to grease. I put a bit on, and i noticed that there was a little bit of rust colour on the white plastic bit (end of the cable that comes...

What are the wires for that sit under the dash? On the passenger side there are two, what look like fuses, over a load of wires. Are they just dash stuff or are they part of my alarm, or both? Im having alarm trouble so i hope they are nothing to do with that as they got disturbed when i took...

Just disconnected it for a while and now my alarm has gone crazy. Is it common for this to happen? Will the alarm settle down?

I get a very slight noise when i depress the clutch. I can only hear it with the window open. Cross between a rustle and a whine. Very slight. Only at maximum depress too. And again on the way up. Any ideas? Thought it might be the cable rubbing somewhere.

Booked for next tuesday, weather permitting. Nice.

About two weeks ago i had some rear shocks fitted, and the handling felt alot better so i did the fronts too. When they were fitted the car felt alot more secure on the road. At the time the guy who did them said they would take a few weeks to bed in (they were genuine renault parts). I didnt...

Anyone fitted them to a higher milage car? If so what difference did it make? Anyone fitted them to a valver or Willy? I have some and will be fitting them soon.

I bought some 10/40 oil. I think its comma, but not sure a its at home. The oil is dark ish (looks like used oil), not clear like other new oils. Its a brand new bottle, will it be ok to use in my Williams? Its semi synthetic. My mate said it might be reconstituted oil or something and would be...

How long should it take? I have the bushes. Anyone fancy doing it for me? Cash in hand and all that. Im in Norfolk.

I am assuming the willy inner roll bar bushes are the same as the Renault 5GTT??? Anyone help? Polysport list the same part for both cars.