Search results

Steel wool to get rid of the big stuff then finish it with a polishing compound

Yeah I've done that before, just run a single wire from the r/h fog to the l/h fog, you shouldn't fail an MOT on it as law only requires one on the driver side. Tell him it's a blank to make the car symetrical

The fog light was a failed project, I cut the hole out whilst under the influence.... Yeah, the R5 wheels were destroyed last time it snowed, I span out in the snow and clipped a kerb hard enough to bend the wheel almost in half lol. Still they only cost me £35. I have since sold the pimped...

As requested, a few shots of my micra build:

I had apex springs on my micra, the ride was so hard I buckled an alloy after hitting a humpback bridge a bit fast. :o It did drift nicely though, rattled me to pieces and motorway journeys were awful

The immigrant kind, they do a fantastic job for a reasonable price :P

Did you see the £12.50 paint job in Fast Car a few years ago? They resprayed a whole escort with halfords rattle cans, looked pretty good for that price. Rat look FTW

Well I have some cheap coilovers lined up, was just wondering if the shock mounts were strong enough to work as suspension mounts too. As for work, you just need a slide hammer and you can tear those bars right out... unless that's the only pivot point.... in that case this is a terrible idea

Has anyone removed the torsion bars and replaced the shocks with coilovers?

Have you recently installed a new software? I had this when I installed motorolla phone tools

Lucky you got a cage then, if you don't see someone in your blindspot and have a crash you'll be ok. Seriously though I'd suggest buying a blindpot mirror to compensate for the loss of vision

Go into windows firewall and make sure 'allow exceptions' is ticked

Just de-cat it, you can get really cheap cats for around £60 to put on for the MOT

Thanks :D

Can anyone tell me where I can get BLACK lowering springs for the front of my 1995 Clio. Don't ask me why and I won't lie to you :D

*gigges*

You may need to space them an inch, you can buy 1 inch hubcentric spacers off ebay for £70 iirc Actually it depends on the offset, you might need arch extensions

It's only 3mm, you any good with a dremel?

No the centre bore is 57.9 on VWs iirc,, you need 60.1 or greater unless you bore them out

Take the bulb out...

Drainpipe, it's what I use for induction kits

Got meself a '95 Clio 1.4 RT off fleaay for £250. Needs tax and MOT. So far I have replaced the exhaust front to back, installed some spotlamps, fitted a vaccuum gauge and fixed some of the rust. Still needs a new battery and and engine mount before I can MOT it. Also insurance is gunna be...