Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Took my rear bumper off last night and im guessing it was a bolt i took out that i wasn't meant too that has caused this problem.
I can shut the boot door, but it has to be properly SLAMMED shut for it to lock other wise it just sits loose.
When it is locked in place it does not seem to sit...
Firstly can some explain what this is on the suspension? Picture if poss as i am very special when it comes to these things!
Do you get bumstops on the rear suspension
Basically i have my car lowered on springs, a 35mm drop (supposedly)
Front is fine, the rear still looks the same height...
Fitted -35mm PI Springs to my 172 ph2 about a month ago now. When i first fitted them and took the car for aa drive i could feel something was not quite right.
Basically when u turn in at low speeds you can hear/ feel the springs vibrating around. Cruising alot straight is fine. When i fitted...
http://cgi.ebay.co.uk/Renault-Clio-Apex-Coil-Springs_W0QQitemZ300251946287QQcmdZViewItem?hash=item300251946287&_trkparms=72%3A984%7C39%3A1%7C66%3A2%7C65%3A12%7C240%3A1318&_trksid=p3286.c0.m14
advert says lowers by 30mm, what u guys think as i was under the impression apex only did a 40mm kit...
Any one interested in this? Need a quick sale
PM me if you have any questions, thanks.
http://cgi.ebay.co.uk/Citroen-Saxo-VTR-2001-low-mileage_W0QQitemZ190245617256QQcmdZViewItem?hash=item190245617256&_trkparms=39%3A1%7C66%3A2%7C65%3A7%7C240%3A1318&_trksid=p3286.c0.m14
Got flashed and a nod from a lad on Saturday. Down by the pantiles area near KFC if anyones knows the town.
I have seen T5PHY going around but this was NOT him!!
Any ideas..........
Car is lowered 35mm at front, 30mm at rear- just springs replaced. I want the back end lower but have not got funds for coilovers.
Back end is sitting to high and round the bends you get a bit of lift of oversteer which is not great!!
Would it be ok to get some springs made for say a 1.6...
Lowered my ph2 172 myself just fitted springs all round. 35 drop on front and 30mm drop on rear. Front end looks fine
Rear - not so much!! Looks like a drag car lol
I know the springs take a while to settle in but i have driven about 500 miles in the last 2 weeks so i presume they have...
got a mk2 clio
jacked it up at rear on the sills
undone 19mm bolt into axle and the springs should be easy to pull out (some say they just drop out)
But mine are pretty well stuck in there
any ideas how to get them out?