Search results

i got T boned in the hybrid last night. suprising how stong glass is when trying to force its way through your head! any way will post pics asap now do i buy it back and put the willy lump in another shell, or a 5 turbo, or got full fat 172?

firstly its wilwood not wilwod, im great with typing, honest! where is the cheapest place to get a 4 pot setup for a valver/hybrid from, ie discs, calipers, hoses, pads and spacers? thanks in advance

im after a itg or green cotton panel filter to replace the oem one, ie in original airbox on the hybrid valver. any ideas where i can get one as cheap as? or if you have any other suggestions please let me know. the only one i don't want is a k & n. cheers

i fancy chipping a willy lump, only mods to date itg air filter,standard airbox, and full stanless. any ideas and links would be useful, many thanks..

SAW THIS , DID'NT IT USED TO BE K BOOST? http://cgi.ebay.co.uk/1993-CLIO-TURBO-1-8-16V-BLUE_W0QQitemZ230138929565QQihZ013QQcategoryZ9861QQrdZ1QQcmdZViewItem

saw it at the kia garage, potter street. didnt this one used to live in chelmsford. used to see it parked up quite a lot?.

saw the back of it for a bit, just poodling along at 80 ish, and wham, off it went. did'nt think these were released until june?

this might rbe a repost, but could be a bargain for someone http://cgi.ebay.co.uk/2004-RENAULT-CLIO-RENAULTSPORT182-16V-TURBO_W0QQitemZ200102158597QQihZ010QQcategoryZ9861QQrdZ1QQcmdZViewItem

saw it yesterday about half 2. it had a black roof and bonnet and everything else white. it was ither a really bad kit or a v6 which had been in a bad accident and fixed with the wrong rear/front axles, and a bodykit kit replaced by stevie wonder himself. now i dont mind bodykits that much...

morning. just a quick one hopefully, when the car starts and is cold, it idles anywhere from 900/100 and then drops down to 400/500 or so. if you then give it a rev it picks up again but is very lumpy until engine gets warm. then its fine. i have changed the water coolant temp sensor...

picked it up yesterday, and f**k me. i honestly did'nt believe there would be that much difference between the two. i have a few issuses with it like exhaust knocking and i think its it got a bent drive shaft now, but other than that, it goes like stink. i would recommend this conversion...

can any of you nice people change the colour of the car in the folloing pics to naples red. anslo can you do one with white wheels, and one with althracite ones on? cars going in bodyshop soon, just want an idea of finished product. many thanks in advance...

hello people. can you help, im trying to find the bonnet vent pictured in the links, but can find one anywhere, can anybody help. you can have a free go with my sister if can find it for sale anywhere. need asap, as it going to the body shop soon thanks...

ive got a 4-2-1 manifold going on a willy engine, thats going in the valver, just wondering if it is worth covering it in heat wrap stuff first, i have heard it will lower engine bay temps, but as ive never used it before i thought id ask you lot. cheers steve

please help, im trying to find the folowing part for my maxi. i need one as soon as, but just cant find a supplier. does any one know where i can get one? please see pic for what im after. http://i165.photobucket.com/albums/u45/diditno/RENAUL15witharrow.jpg thanks steve

i have got hold hold a maxi kit to stick on the valver and and looking for the wheels to with it. the closest wheels to the original i can find are on prima racing website but the don't do a 18" version, see link http://www.primaracing.com/ProductDetails.aspx?pid=27718 has any one got an...

i have been given one of these from a firend who has broken his car. just need to know if anyone has and fitting instructions for this for a 1.8 16v engine. if so if you could forward a copy of them on or any info i would be most greatful. p.s. i know some people on here dont like them but...

im gonna repaint the new valver over the next few months when i get round to it, once ive done the arches etc, can some one do me a pic of a valver ph2(standard) ie no kits with a liquid yellow paintjob? im ither gonna do this or keep it naples red. many thanks steve

havent seen one round these parts before. any one on here?

spotted you around 1.30pm, had a sticker in the back window, and possibley big one on the front, could nt really tell from the lorry. anyone?

ive finally got a bit of wokshop space available, and due to recent surgery have had nothing to do but come up with ideas on what to do to my new valver. bodywork is gonna stay standard this time, but ive been offered a 172 lump for a reasonable price with everything else need for a...

young blonde lad in a black 182, lost the back quarter as far as i could see. anyone know who it is?

im after pics of a black valver with black wheels, if anyone has some please post them up. im picking up a new valver in a week or so and was just wondering what it would look like. many thanks

firstly starts with a 5 gt turbo then a clio. flamin hell this bloke can drive it. enjoy: http://media.putfile.com/LOMEJORDERAGNOTTIClio-16vby-HOMMYVLQ58

saw a nice looking 172 cup around 12.30 in knight street sawbo, shortly followed by a dark blue 172 with lexus lights, pulling out from tescos area in edinbugh way, anyones?

spotted these on ebay, i would have um but dont have that engine anymore, there so shinny, http://cgi.ebay.co.uk/Renault-Clio-19-16v-Williams-F7P-F7R-Polished-Goodies_W0QQitemZ4604730289QQcategoryZ10410QQrdZ1QQcmdZViewItem

hello, for you that know my car, know it has a 5 turbo lump in it, any who, it spent 3 hours sat on the hard shoulder of the m11 yeaterday due to a fuel pump failure, any way, got it towed off, and rigged a independant power feed to it and it sparked in to life again. what i need help with is...

saw it in the car park yesterday, and thought nice. then saw the back of it, why!

car looked nice, saw you about 8.30ish, p.s. sidelights ok fair enough, but side lights and fogs, when it's not bloody foggy = muppet.

as above, just watch and enjoy, some you may have seen, some you wont. http://videos.streetfire.net/Player.aspx?fileid=163CFE43-E2A5-409B-8079-DE182AA81571&p=0