Search results

^^^^^^^^^^^^^^^^^^^^^^^^^^ I should cry, but i really find it quite funny

as promised above another update is here. today was all about tidying the bay / front under-carriage as the subframe is away being sorted. So i was armed with various paints, my autoglym engine and machine degreaser and an away of cleaning apparatus, i am not going to bore you with before and...

interesting

Re: No Compromise ph1 ITB build (Fastcar, BTM, TDF, RS Fab) - ITB update p77 Thinking done, splitter purchased. POW On another note, off down to work on the car again tomorrow, will be givibg the bay and underside of the engine, and anywhere else for that matter a good clean and paint...

Boooooost, good times ladies

buy them here - http://scene-media.com/blog/?p=6637

Re: No Compromise ph1 ITB build (Fastcar, BTM, TDF, RS Fab) - ITB update p77 popped down to the car, collected the little straps that go between the chassis and subframe/wishbones (as missed them the other day) and also the wishbone powerflex kit (so i had it with me), then headed over to...

Re: No Compromise ph1 ITB build (Fastcar, BTM, TDF, RS Fab) - ITB update p77 will do mate, unsure if it will be tomorrow evening but will send over a text anyways cheers mate

Re: No Compromise ph1 ITB build (Fastcar, BTM, TDF, RS Fab) - ITB update p77 will stop by there first thing tomorrow then and collect them, whats your postcode rog? got a welder to tack them in too? lol

Re: No Compromise ph1 ITB build (Fastcar, BTM, TDF, RS Fab) - ITB update p77 Caged said they can push the bearings etc out may just leave it with them and then just sort my mistake out when i get them back will just grind a tiny bit back for the tacking....

Re: No Compromise ph1 ITB build (Fastcar, BTM, TDF, RS Fab) - ITB update p77 we had no blow torch, we did try fire though...lol oh well, hmmm... perhaps i need to go back and collect the wishbones tomorrow then try and get it sorted over the weekend

Re: No Compromise ph1 ITB build (Fastcar, BTM, TDF, RS Fab) - ITB update p77 Will be the same as the cage.

Re: No Compromise ph1 ITB build (Fastcar, BTM, TDF, RS Fab) - ITB update p77 All too late i hope, when i get the bits back they should already be pressed out.

Re: No Compromise ph1 ITB build (Fastcar, BTM, TDF, RS Fab) - ITB update p77 cheers mate. we were using tony/lukes 30 tonne press, its just the shame of the wishbones mixed with the set heights of the actual press meant it was impossible, we tried heating them etc etc but nowt....lol

Re: No Compromise ph1 ITB build (Fastcar, BTM, TDF, RS Fab) - ITB update p77 cheers for the heads up guys, but i read this after i dropped the stuff over. popped down the unit to collect it early this afternoon and to strip the final bits off... just couldn't press the bearings out of the...

Re: No Compromise ph1 ITB build (Fastcar, BTM, TDF, RS Fab) - ITB update p77 All done chap, should be able to message away Yeah mate its not as bad as i thought it was going to be, mainly down to the fact i had the directions from gray and crispy. Its all nuts and bolts so isn't too bad...

Re: No Compromise ph1 ITB build (Fastcar, BTM, TDF, RS Fab) - ITB update p77 Sounds like a good idea

Re: No Compromise ph1 ITB build (Fastcar, BTM, TDF, RS Fab) - ITB update p77 Sorry mate, thats my poverty spec, forum user spec 20 messages allowed i spose... Lol Really do appreciate it, Will be looking at it again tomorrow, possibly masking it up and dropping it of also, will update...

very nice chap do like the design of the graphics

Re: No Compromise ph1 ITB build (Fastcar, BTM, TDF, RS Fab) - ITB update p77 i was going to ask you crispy what you got powdercoated..... but i just browsed the thread for a while... then found the answer everything...lol

Re: No Compromise ph1 ITB build (Fastcar, BTM, TDF, RS Fab) - ITB update p77 so the update from today... subframe off. sometimes i am really not a fan of this forum, there are some proper idiots on here, however last night and this morning i found 2 people that were totally the opposite, they...

Re: No Compromise ph1 ITB build (Fastcar, BTM, TDF, RS Fab) - ITB update p77 if it was going any colour it would go the same as the cage yes, infact the people that i have already spoken to do the powdercoating were Caged Laser Engineering (Caged)

Re: No Compromise ph1 ITB build (Fastcar, BTM, TDF, RS Fab) - ITB update p77 so i have another few days ahead of me to work on the car, that i wasn't expecting, so i will be adorning my gladrags and heading on down later. I have been speaking with crispy and today i think i will be hitting the...

Re: Dave.'s Trumpeted Engine Spec, Cammed Up Gunit, 2118'd Carbon Vagina Boob obsessi mine is also jenvey's, but running pas and not ac... this seems the average i would say for itb's and cam's, i hope to push mine nearer 220 with the new exhaust

Re: Dave.'s Trumpeted Engine Spec, Cammed Up Gunit, 2118'd Carbon Vagina Boob obsessi i was also going to say i have graph's but thought about the difference between the 2, AT and Jenvey's so didn't bother...lol

Re: Dave.'s Trumpeted Engine Spec, Cammed Up Gunit, 2118'd Carbon Vagina Boob obsessi don't i know it.... will be speaking to you shortly with regards to some bits... ie what needs to stay and what needs to go.

Re: Dave.'s Trumpeted Engine Spec, Cammed Up Gunit, 2118'd Carbon Vagina Boob obsessi mine was a daily when we all decided to butcher it....lol

Re: Dave.'s Trumpeted Engine Spec, Cammed Up Gunit, 2118'd Carbon Vagina Boob obsessi Good times, sounds like you are stoked, i miss mine

WET

Re: No Compromise ph1 ITB build (Fastcar, BTM, TDF, RS Fab) - ITB update p77 sure there is a picture of the flocked mark 1 top dash, that will sit above the Dash2 but that is all, don't need anything else. as for your electrics, speak to Matt at Tour-De-Force, he is on here and pretty much...