Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Ive got the passeger side of the fitting kit bolt off between the manifold and cat but im really struggling on the other one.
just struggling to get a spanner and socket on while lying on my back and tried doing in from the top also in the engine bay !
any tips or anythink that may make it...
Ive disconnected the majority of it, ECU has been removed and fuse box removed.
The wiring loom seems togo behind the exhaust manifold but i can see behind and i cant get the 2nd bolt of the manifold flange meets the cat pipe
can the manilfold be pulled up through the engine bay once i have...
Do i need to remove this prior to removal of the engine ?
Got to fit a new PAS pump anyway once i get the engine on the stand
Will i benenfit by removing this first ?
Also anyone have a clio workshop manual they could send me please :approve:
Trying to do everythink from here...
Does anyone have a renault Diesel and Running a diesel chip box ?
Do they actually work and give you alittle more power and MPG ?
Let me know what your expreriances are on these ?
Also there a wide range and price difference, are they all the same ?
cheers
Mike
Ive had my lower wishbone sleeves tak welded and the bushes fiited but when ive come to fit them to the car there no where nere the righ position to line up with the subframe mounts.
It looks to me tha the sleeve has not been welded further enough along as the bush it about 5mm away from the...
I'm thinking of replacing the lamda sensors on my car while ive more or less replaced everythink else lol.
Anyone got part numbers and cheapest price.
Bosch or NGK i am would want to install
My dad too them to work but failed to get them out.
I was thinking of popping to birchdown or NW tommorow to see if they could press them and tak weld for me.
I'm going to be taking my car there to get some work doner but thinking of getting these done before putting them back on.
how long...
Ive removed 2 out of the 3 but one of them just seems to be spinning. i can only assume that what the bolyis screwed into is rotating !
any ideas how to get it out.
theres not alot of room to get anythink above !
can anyone post up or links of silver clios with different colour coding etc.
This isto be track inspired.
Not sure which colour combo, fluorescent green, yellow or orange or summit else ?
anyone got some pics?
Whats the best tool to use ?
I have a scorpion system to fit to my clio 172 and i think i will probably have to cut a recess in the bumper possibly.
cheers
mike
Ive never driven my clio since buying it a year ago ! Needed afew jobs doing in order to get it road worthy !
I'm almost there to get it ready for an MOT and tax but the power steering pump is leeking so i want to get this done before i take it for mot and tax.
Is there anyone in the Northwest...
I am going to buy a stainless system prior to getting my car on the track, it is being set up for track days so will be running a de-cat also.
i dont fancy a milltek or anythink like that.
was interested in a k-tec or even the btb system.
Has anyone ran the manifold of ebay ?
are...
Do you have to take the exhaust off and heat shield to drill the 2 holes into the chassis. I was going to drill two holes into the exhaust channel but obviously to fit the stress plates underneath ?
just wondering if i need to remove the exhaust and heat shields
Has anyone had this carried out ?
What sort of time to complete 2-3 hours ?
I'm going to get a new Pump , Pulley and belt from renault but i think i'm going to take it to get fitted and tentioned correctly.
Any ideas on labour cost for this ?
Unless there is anyone local who fancies...
I will be looking to purchase a full system for my clio soon.
Which to go for Ktec or Yozza ?
I doubt it will be this month as it looks like my PAS steering pump needs replacing so that going to cost alot of money for a replacement and to be fitted !
Not sure where to get it fitted...
I need a Full workshop Manual for my Clio 172 as i dont have information.
I have searched on here and the RS tuner link does not work that i found.
also found a website that has bits from a manua.
can anybody help me please.
:D
Started the car and a horrible screeching noise while trying to turn. Checked the resevoir and it has lost some fluid ! Either the pump is leaking or soemthin related ?
Ive never seen the pump due to the position of it !
Any tips for the best way to get at it and remove it without any...
I currently have my 330 M sport Convertible insured with them along with my 1999 Nissan 200sx Turbo.
I phoned up to change the policy on my Nissan over to the clio 172 and theyve told me then cant insure me on it because its a Sport !!!!!!!!!
I'm 28 years old and 5 years NCB on the BMW...
Any ideas how to get this bolt out, it looks like the head is rounded from previous owner :(
Any ideas how i can get this out, I know these are pretty damn tight snap fit fro removing the other one !
I have some sparco seats , subframes and sidemounts.
I also have sparco 4 point harnesses.
The problem is i dont know where to bolt my harnesses.
I realise the rear of harness needs to be bolted where the rear bench was but where do i bolt the other two parts of the harnesses ?
There...
Ive installed my Sparco F300 bucket seats, Sparco subframes and side mounts.
I have sparco harnesses aswell and there are 3 mounting bolts, one on left hand side of seat, one right hand side of seat and one which needs to be bolted underneath rear seats.
There is only one threaded section...
Just fitted new boot lock motor, connected up and rear windscreen motor.
Boot lock is still not locking and rear windscreen wiper is moving !
could this be somthink to do with taking the stalks off ?
I have noticed a thin green wire which seems to be disconnected or broke which must be...
Under hard acceleration in 1st and 2nd gear i can hear which i think is possibly the exhaust knocking on the subframe.
If driven normally it doesnt happen so im thinking its excess movement.
Would i be best buying a KTEC uprated engine mount ? I which one would it be most likely the upper...
Ive just connected my windscreen washer motor and mechanisms back in place. Ive noticed only two out of the 3 stalks located on the scuttle panel only rotate.
Is this correct ? as far as i can see i think only two are driven offthe wiper motor,is the third purely a support or doi have a...
Anyone know how i can get the bonnet to unlatch ?
Ive been re-fitting bonnet catch and cableive closed it try and it wont open !
I checkedthe cable end was moving when pulling the handleinside but once the bonnet had fully closed it wont release !
imanged toget the bumper of but even...