Search results

Just found a bearing, not sure if its exact but It seems it. 25mm inner, 55mm outer and 48mm long. So 3mm more outer and 11mm longer (according to a thread on here) If its good enough for a people carrier with the kids and dog in the back then should be up for the job on a clio espeically a...

So I take it this would be used to put bearing on, but it looks like I will need to take the pinion apart to remove and maybe even put on. I have a spare rack I can practice before I do it on this. Not a clio but same concept, its held together with pins Also for those that loop pas racks...

Its fairly straight forward but there are quite a few changes that had to be made. Firstly the bolt spacing for the hubs, the scenic hubs are the same for the top 2 bolts but bottom 2 are slightly more narrow and down, I used a die grinder and took my time, made sure to keep putting the hubs...

Could be steering column boot

I have some sleeves coming, Ill post pics when I get them (y) dont think Ill be anywhere near there soon mate but thanks!

A mock up picture before I finalised everything This is without spacers! Apart from a new oem caliper, everything is the usual rusty and un aesthetic, this stage is to get everything mechanical working, when I can get a larger space to do this, then I can start stage 2 which will be getting...

The garage has had a major change! This was at its worst, not a place to work in. I moved a few things around and tried to get some order but theres only so much I could do. It was my birthday the other day and decided to treat my self and go all out and make the most of the space I have, the...

Cause its sitting for so long, probably needs a refresh in most areas tbf

Zip tie should be fine its what I did

A while back I had ptfe hose for return which is rated to 235 ish so plenty, but for ease looking at push on aeroquip hose which goes up to 150, is that not enough? I have a temp gauge but I wont be putting that on at this stage, want to rebuild things back up first and make sure it all works as...

Dont worry about it mate. You helped me here all is forgiven 😄 So the pressure will be at the gear, but due to the spool valve it can only go on and off one way through gear end, unless you were take it all apart which I dont want to have to do!

Just bought a press but never used one before, need to remove this bearing and press in a new one. Still dont have any sleeves or such to do this as Im not sure how it works so dont know which ones I need! Any help appreciated

long mot

Anyone know what stuff to buy? This is what Im looking for but its american https://www.eastwood.com/aerosol-injected-cleaner-11-oz-net.html, There are things like injection cleaner but Im not sure if its the same sort of thing?

I found those lightbars I was after, couple different types from sealey. Havnt bought one yet though, just bought a mobile tool chest and now looking at more cabinets! o_O https://www.sealey.co.uk/category/5637150846/under-bonnet-lamps

No one would blame you mate, you gotta look after yourself more than the car. My problem is Im too far to quit and couldnt sell unless I wanted to lose out massively, Ive just bought all new equipment and cabinets for the tiny garage to make life a tad easier!

@RustyMojo Are you me in the future? Do one job it makes another worse, just want to start from fresh with a good example and be done with it :ROFLMAO:

The abs sensor?

It amazes me how people like this have the money to buy cars in the first place

Ive just seen these which seem like a good solution. Just need to figure out how they can be used with a dimmer and wall plug. https://www.bltdirect.com/ip20-led-battens?filterLength=2419&count=3

Just need more batteries now, 60 odd quid for one though! Have also done a buy considering its my birthday and bought 2 of these wall cabinets, 680mm length each, the table is 1600 for reference, also part of the same modular set a sealey 7 draw roller cabinet, rather pricey and I think you have...

Its like when everyone else got to go to the theme park but you had chores to do at home so couldnt go, replace chores with broken clio :rolleyes: Im kidding anyway!

Makes me kinda depressed reading this 😄

By far my favorite game in recent times, it still surprises me when I play it due to the size of the map and discovering new areas that I missed

Wheres the fun in being sensible? 😄

Gotta be cause its silver ;)

Looks good! Cant quite see from a video but they go really bright? Im looking at this one, 2 to make up a metre then maybe another 2 for width https://www.ebay.co.uk/itm/500x6mm-Ultra-Bright-12V-140-LED-Strip-Light-for-DIY-Car-Lamp-Light-6000-6500K/174347635136?hash=item2897edc9c0:g:IEUAAOSw3uxfDEA1

This combined with this sort of thing I was just looking at https://www.bltdirect.com/1-metre-wide-surface-mounted-black-led-profile-p13-30-8mm-x-10mm-c-w-clear-cover They are going under these wall cabinets (just ordered the cabinets not everything) Although do have a 7draw cabinet same...

Just bought some wall units to go above my work bench and want led strips underneath or just whatever is super bright, is there anything I should be looking at in particular apart from chinese special on ebay? Also does anyone know where you can buy led bars that can be used to mount say inside...