ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Search results

  1. BashRacing

    Horrible noise when pressing clutch

    Guessing it's N/S/F as that hub has been off once or twice, With all the trouble on that corner have you considered Reliant?
  2. BashRacing

    Horrible noise when pressing clutch

    Should of told him Allah is your wing man (death to infidels etc) you would of got away with it on religious grounds
  3. BashRacing

    Horrible noise when pressing clutch

    Did you get done for that exhaust? is it clutch pedal dependant this noise dan or can you just hear it better with the engine not revving do you think?
  4. BashRacing

    Corbeau Clubsports

    Possibly if you're passengers Bulimic
  5. BashRacing

    ABS Wiring fault - how to fix?

    air gap should be 1mm ideally, the 5v reference down is only part of the battle dan you also need the signal back to modulator valve/abs ecu, Does any one on here have the wiring diagram for the abs loom so we can test the continuity of the wire back to the ecu? who's the resident sparky guru?
  6. BashRacing

    Corbeau Clubsports

    If you are the only driver you can drop them 20mm simply by removing the seat back and forth rails I'm 5' 8'' and want to be sat lower so if you're taller they will need dropping, if it comes to it I'll just knock up some custom subframes like a copy of the extra low cobras that are no longer...
  7. BashRacing

    Corbeau Clubsports

    Mine with omp subframes fit nicely but will be modifying the subframes to lower them an inch or two, Quality is miles better than the price would suggest,
  8. BashRacing

    ABS Wiring fault - how to fix?

    being a civil servant with almost part time hours I'm home now, so when ever you like.
  9. BashRacing

    ABS Wiring fault - how to fix?

    No problem Dan, Did you check the resistance of the sensor?
  10. BashRacing

    Daniels Blue 182.

    That's dedication Dan, Spoiler does look mint!
  11. BashRacing

    ABS Wiring fault - how to fix?

    don't worry dan mine is running perfectly so i have free time to work yours out:smile:
  12. BashRacing

    ABS Wiring fault - how to fix?

    I can only say what Toyota abs sensors test at which is 1.6kohm in between teeth and should dip to around 800ohm when on the tooth, check how many teeth yours has, should be this below, worth a try for an hours work...
  13. BashRacing

    ABS Wiring fault - how to fix?

    i wouldn't of thought so, did you look into the brake pedal sensor code dan?
  14. BashRacing

    Best place for geometry set up LEEDS

    Track Torque at tockwith http://www.tracktorque.co.uk/contact.php
  15. BashRacing

    Kangoo van blue smoke!!

    turbo passing oil?
  16. BashRacing

    Autosport show 2015

    This was in the Coys auction, The only thing I wanted from the show
  17. BashRacing

    BUT WHY ???????

    ''First to see will'' have their retinas burnt out you would have to view on a dull overcast day to avoid permanent damage.
  18. BashRacing

    Has anyone fitted a Quaife style gearknob on a clio?

    the throw of the stick with the scenic set-up is the same as standard so you won't rush the syncro's any more than a clio set-up, it wouldn't take much to knock up a piece of stainless tube as the lift reverse over the stick if you like shiny things.
  19. BashRacing

    Engine block heater

    http://www.ebay.co.uk/itm/Coolant-Block-Heater-Engine-Pre-Heater-Hotstart-ATO-ONE-220-240-VAC-/231157916341 This is your best option
  20. BashRacing

    Engine block heater

    Not in this country dan you can either use a fuel(diesel) burning heater as fitted to a lot of later Rovers/Land Rovers called thermo z tops or the electric element type that you plug into the mains much simpler and cheaper to fit in the heater pipes, this are mostly fitted to stationery engine...
  21. BashRacing

    Saxo turbo

    The Kid in the ATSpeed video seems a bit Educationally sub normal to me.
  22. BashRacing

    French Boost Project

    Good work, you've spent your crimbo holiday wiser than me, also can i have the part number for the gas fire's k&n, mine could do with a few more btu's
  23. BashRacing

    Z4M Roadster

    boot space on the coupe is little better, but if we wanted boot space we would of bought an m5 touring
  24. BashRacing

    French Boost Project

    Looks in good condition that matey, If the back axle has been lowered in the last few years it shouldn't be easy enough to put back to standard, I still think you should fit the turbo set up in the rallye for scary fast fun.
  25. BashRacing

    Which French death trap?

    Did you do a deal without the other wheels, And did you brewer him!
  26. BashRacing

    Bash's Hillclimb car

    It's the stiff shift 3.0 it came out of a 172 cup gearstick I found on ebay for £30 so just stripped it down and fitted it to the scenic shifter, It feels a lot better than standard, to the point where I would say it's about perfect, The pure motorsport kit is great for race cars but it would...
  27. BashRacing

    Bash's Hillclimb car

    I thought the seat mounts looked plain, and because I like fiddling if fitted RS stickers, NEED TO GET OUT MORE!
  28. BashRacing

    Bash's Hillclimb car

    cheers buddy, Im ok with most things but electrics especially on air bag systems scare me, just needed some reassurance
  29. BashRacing

    Yep, Still Not Working!

    If the exhaust gasses can't escape the back pressure in the manifold will hold the carbon dioxide rich air in the cylinder, which in effect stops the fuel that's being injected into the cylinder completing full combustion due to lack of oxygen.
  30. BashRacing

    Yep, Still Not Working!

    Sounds like cat has collapsed due to it running very rich and saturating the cat with unburnt fuel which has partially blocked the exhaust, fit a decat if you have one handy (if not knock the old crap out ghetto decat style), clear the fault codes and the only one that should return is catalyst...
Top