Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
when the throttle is shut you have a vacuum, as the throttle valve open you get atmospheric pressure the 13.9psi, well actually atmospheric pressure is 14.7 psi so you have vacuum of 0.8 psi through restriction in the intake
post some pics up but if its a cup you don't need the compensator connected anyway,
here's the old thread about your problem in case you haven't seen it
http://www.cliosport.net/threads/clio-cup-172-failed-mot-due-to-rear-brakes.536219/
Don't mention cliosport,for a quick result they will hopefully give their head a shake realise they're in the wrong and give you a pass cert when you tell them you will be going for an appeal,
but if they continue to be Aholes go down down the route of doing the appeal, if you need any help...
if they say they don't have any vt17s (shouldn't but have heard it before) you can print one off the Vosa webpage, you fill it in and send it off with the evidence form 'matters of testing' mag and a test fee which you will get refunded after the test and a couple of vosa examiners (both top...
Just spoken the Vosa examiner for LS9, these jokers are known for this type of thing, Like I said ask them for a VT17, print off that page from Matters of Testing and tell ainleys this is why you're appealing, if no joy get back to me and I'll sort it out
Forgot to add, The Engine MIL light came back with df057 pre cat lambda signal intermittent, So I swapped the post and pre cat sensor round in the exhaust and went for a drive, fault code returned with post cat lambda this time, so a new sensor is on its way, the cat looked healthy too with a...
I also came across a set of these halfrauds 15'' alloys for £40 which will come in handy as a set of track wheels , They're all straight and true 15x6.5 et38 and having had some of these in the past I knew they were pretty light at 5.7kg per rim, these were actually made for halfords by BK...
172 cup shocks arrived today along with spring top plates & new bearing, the cooksports I recently fitted should finish the suspension upgrade for now,
sabelt tow hoops to fit ready for harewood next season,
Megane Scenic shifter with a Nylon gearknob from motorsport tools that came out my old hillclimb car, And then drilled out to 14mm? I think,
Then cut the old knob off with a hacksaw and epoxy resin to fix in place,
link to knob below...
On a beam setter Dan, MOT station will probably charge you a couple of quid to do it for you,Get them to set it as near the top line as they dare for better view of the road without blinding other people, the potentiometer on the rear axle is the self levelling system for it and is self...
I used to work for merc we had sprinters come in from a frozen food company on 3 driver 8 hour shifts 20k service at 8 weeks old!!!! They were knackered at 18months old