Search results

I then began the pointless task of weighing all the shite I'd taken out of it (as in interior trim, not just junk I was keeping in it) Then Car Parts Santa turned up and emptied his sack all over my front room: It was one of those glorious ex-display pallets that Rimstock used to...

Yep since then, it was 6 years ago :LOL:

Found it! Sh*tty Build Thread

He can't let the internet mandem know and spoil the surprise!

That seems like a solution to my "single Clubsport and no available matching ones" conundrum. Just wondering whether it will fit me like the Clubsport XL... Nice new seat for me, older seat moved to the passenger side... Although the non-matching harness holes might drive me crazy. I'm more than...

Well he's an outlier, as I've never had any issues when I was running them and never heard of anyone else having that happen. Bear in mind that these are usually 20mm thick minimum, so its calculator time to check fitment. What are the specs of the wheel to start with?

Specifics would help...

It drove fantastically like this, but did like to snatch the wheel out of your hands over uneven ground/potholes. I did a couple of Sunday B-road blasts with friends with it like this, then my daily got crashed into so the camber had to get set back to more normal settings.

Still in 2017, I decided to do a functional mod! Good old Eibach camber bolts! Subsequently adjusted to offer all the camber

If its small-ish stuff, me. Approx 5" or so dia.

For me, I don't have enough skill, trackdays planned, or free cash to splurge on ASTs. Especially with the upkeep they need. That said, the pricing makes you think... Grams springs are £144 If you were to pair them with Koni Yellows (at £644) thats £788 BC Racing coilovers are £1000-£1200 Gaz...

Asking here rather than making a new thread - has anyone compared Cup shocks with the Koni adjustables? I've done perhaps 10,000 miles since replacing the cup shocks and am looking to get the Grams springs. Wondering whether to go for the Koni's from Kam Racing whilst I've got it in bits...

In the meantime I also binned off the carbon canister, the foglight, the headlight washers (sssh don't tell VOSA) and relocated the horn. Now I'm not an expert in vehicle horns, but the existing horn was a twin tone one. I moved the bracket, bent it out of the way, and screwed it down tight. I...

The Skoda Fabia splitter seemed like a correct choice, seeing as I'd be smashing it off the drive most of the time. The paint dried on the crasher (like that's important lol)

I now had the most ventilated crashbar in all of the North West! So it needed a lick of paint!

Still in 2017 Whilst they are a decent looking car in standard form, compared to lower Clio models, a few too many drives out with mates with 350Z, C63AMG, Porsche Cayman etc made me want it to look a little more aggressive, or "played with". Cue, pointless visual modifications...

I went through a spell of using axle stands on the subframe to support it, and then realised I could take the axle stand "seat" out of the body so I didn't need to jack it as high (i.e. higher than my jack went, so had to use two and blocks of wood). Neatly fits there! But then I wasn't sure...

Starting off with no context random shots circa 2017: Oulton Park

That's tempting. How much room is there nearby when the pump is still in the car? Car is at my dad's so haven't got it here to look at. Tempted to go the simplest way though and just use a jubilee clip onto a reducer.

To be honest I hit a quiet spell yesterday afternoon and got purchasing to try and source these. Couldn't find anyone with any stock or source for these unfortunately. I didn't try Bapp as they're a competitor of ours locally, may be worth a try in your Donny branch.

A mispick at the supplier perhaps?...

I kinda like how ugly they are! Makes them look purposeful. What about if you re-fitted them from behind, so the "flange" was hidden, and the cutout only showed the guts of the vent?

I've never been able to successfully rectify my headlights but I've seen a coat fresh of lacquer work wonders on other people's.

If this hasn't been sorted I'll put the feelers out through work. Any idea on quantity? Does he want 4 or 400?

I bought a house :LOL: To be honest, since the last post, I changed job twice, went through COVID (so that's 2 years deleted), bought a house and renovated it and got some cats. But I've found all my photos of me doing bits so I'll be uploading them in the next few days.

I still have this! And its still on Apex springs :LOL: As it stands currently, even though its an old pic:

It won't be particularly interesting, but I'll see about getting one done! In fact I might have one on here somewhere from 100 years ago...

Will do! Clearing the garage this weekend to make space to strip it down! Does anyone read build threads anymore? Worth doing one?

Defo fitting a cooler. I'm currently harassing Beauvais via PM :D I was thinking as a belt and braces technique, cooler and uprated fluid, seeing as its not exactly expensive!

That's interesting, I actually deal with Tetrosyl through work (both buying from and selling to) so it would be worth getting in touch with them to check! Would there be any downside to going to Dexron V? Other than price? Also, going into the 'volume on demand' idea, as long as the cooler...