Search results

Neeee Naw Neeee Naw, Search Police! Was only Yesterday too. http://www.cliosport.net/forum/showthread.php?691792-Footwell-LED-s

Probably yes as long you keep the wiring loom as they don't use an ISO plug, controls obviously won't work but will have to use the buttons etc.

^ the Whole 98 BHP you mean?

Not Head Gasket Failure? No oil around the filler cap, water missing out of the bottle?

Probably never, 206 GTI seats fit just fine though.

No the maps are sent individually, ignoring the cost of the box as you'll sell it for the same price, the map unlock is €49 and the maps €29, ignore the crap about £90 unlock codes everyone keeps reading the price on Fastchip for a V6 Clio, it discounts the price when you select Clio 2 Sport...

Definitely do the RStuner makes such a difference, it's worth it just for the Cold starts being so much better and pulls better earlier on. Decatting is worth it too, if you can be arsed with the hassle of changing it back once a year.

This may sound ignorant but are 172's even expensive to insure for a younger driver with a clean license, my 182 costs the same as a 1.2 to insure these days? I found mine is the same price regardless of the car, before I got the Clio I looked at TT's and Z4's and S2000's and the insurance was...

Because we have all done it and I'm sure most will agree that after a few weeks the novelty wears off, you forget it's even there as it made no difference and you always want more, such as proper power and end up wanting the likes of the 172/182 and think that was a waste of money

In a shop like that they should have been using CO2 not water.

Invest in savings to sell car plus cash for a 172.

I don't think MOT places have a Duty Of Care.

I know but the Squeal is a moving part mate, it would have gotten very hot during the fire and likely caused more damage than you would initially see. I'd seriously get all the belts and tensioners checked.

The tensioners are made of plastic, I wouldn't drive it or run it if they have been exposed to fire, probably melted / warped now. on drivers side too.

You sure the cat is on properly, stand well back and take a look at it from the side, is it hanging down at all? have you bought a new clamp and what sealant did you use for the cat to Centre? Ideally you'd want a new Cat fitting kit after taking it off too, or just decat the thing and be done...

So you'd need a 172 Cup heater system / Matrix / wiring.

I used to use it until I discovered Turtle Wax Color Magic, people slate the stuff but the beading and shine is pretty epic, the Machine Cleaner in a spray bottle is quite good for wheels but nothing like Purple Wonderwheels, the good stuff they make is the ones that come in a black box with red...

Thanks dude, quite a decent guide there.

It's extremely bad practice to re tension a belt, you will need a new belt at least, easiest way is bumper and headlight off, you do not need to tip the lump.

Where is this guide dude, was thinking of doing this at some point.

Easier way mate, get a 172 and make it into a Van, you can remove the rear windows and get panels to cover like a van, strip the rear and fabricate the usual Plywood around the Wheel arches etc job done.

What Chip said. remember not all " Rubber" is used to rub pencil out and soft flimsy crap.

Thought you put a Cup Engine in, has no AC, if not then you'll need a Cup set up / AC delete.

It won't ruin it at all, all the cones are made from some sort of polymer, the thing I was trying to get across was not to buy cheap paper crap, and no to get the best sounds range you want the lowest and the high Hz range, you never notice you cannot hear bass out of speakers? it's nothing to...

no as you need V6 struts as the Spoiler chavs itself on the roof otherwise so never been viable for a 3rd party to make, best bet is a breakers when one comes up, Ebay or buy new, it's around £350-400 inc LED light, plus painting, then you'll need 1 series Bonnet struts which are cheap 2nd hand.

well here is 35Hz and I found them in Seconds http://caraudiosecurity.com/ts-e130ci-13cm-components You know most car speakers are made of Rubber right? as are these ones with a Butyl edge, Material is very important, if you actually check good quality speakers such as Mission and Bose as an...

Love the way he's highlighted thumb grips intact.

^ this is due to cone depth, Size and Displacement, the short underseat sub cones do not flex very far compared to regular subs that travel further, and the seat above absorbs a lot of the noise, also if you mount the sub on some MDF under the carpet will improve the quality as it's more rigid.

There is a fair amount of people out there that know them, some people will try and scare you saying ONLY a specialist can look after your engine, which really only applies to timing and belt related jobs just purely for the fact of having the right tools, but to be honest changing clutches and...

Errrrr I believe you will need to activate BT on the Car, then scan for devices on the phone, it should then pick up your car, then you should get the option to pair the devices etc...