Search results

Nah. Can’t get any parts

Yes that’s me! 😂

Yes yes yes! All the lads from work did it and it was f**king hilarious!!

I’m going to delete it so you can’t read it lol

Ah so that’s you! Lol! You sent me an invite the other night when I was in a game and I didn’t know who the f**k it was 😂

I can measure the outer diameter mate yeah, but it literally is 5mm smaller than the outer diameter of the seal. 👍🏻

Another couple of good games in HC death match with @Cub. last night. He even got to witness one of my mates abusing the opposition too 😂

Level with the line or slightly in the blue bit. 0.5mm tops. I use the socket for the diff nut mate as it’s pretty much a perfect fit.

@Davyboy888 Here you go mate. The red section is where the seal sits and the bit below the blue section is the line I’m talking about. I normally fit them so the seal is around the same height as the line, but not below. Slightly protruding is also fine. HTH 👍🏻

Ok mate no worries. I’ll sort it today 👍🏻

There’s a line about 8mm into the casing where the seal sits - level it to that. If you’re not sure, I’ll take a pic and highlight where I’m talking about mate 👍🏻

Put some oil on the lip of the seal to help it over the shaft. Get a socket that’s a similar size to the seal and tap it home. Not got a socket? Get some rolls of electrical tape (needs to be black - not red or multicoloured) and use that to tap the seal home square.

No action tonight then? Or COD?

Lol they were a good few games we had last night! And the abuse they were dishing out to the opposition after you’d gone was getting brutal mate! 😂

Right the good news is you can extend your search to a 130 box as you only need the upper half of the casing mate. It’s down to the bearing setup. It would be hit and miss as to if you’d get another 129 with that bearing setup, as Renault changed them part way through their build. That...

What time mate?

I’m afraid not mate. There’s 2x different bearing setups. Post a picture of the 5th gear end without the gears on and I’ll tell you which box to look for. 👍🏻

I’ll drop you a pm later mate as there’s a few options. 👍🏻

That looks like it’s off the 5th gear selector fork mate. It acts like a locating dowel when it’s in gear, but I’m not sure what would’ve caused that to break off. Other than it’s french and just decided to throw the towel in 😂 Yeah sorry mate I keep the parts in stock for boxes I’m building. I...

That is actually fixable lol I’ve got all the parts in the garage too 👍🏻

Potentially a broken tooth off one of the gears in the diff and it’s got trapped between the diff face and the casing.

Yeah I’m PS4 mate. I’ll have a look and see what I can find out

Lol fukcing typical eh! Could you hear me then? A lot of the other lads I play online with are cross platform too and I can hear them no problem. 🤷🏻‍♂️

@Daz... do you have a mic? I couldn’t hear you last night at all? Sorry I left and went into the other group. They’d been badgering me all night and I was taking some abuse in the WhatsApp group 😂

It could be cv joints mate, but it could be the internals of the diff. Really difficult to say what it is without hearing it

Can you get a video of the noises? It really could be anything mate

Yeah that’s the one and it’s not one of the bad batch mate. 👍🏻

It’s on the diff mate where the Quaife emblem is engraved/printed/etched

Send me a picture of the batch number on your diff mate - you may need to send it back as they’ve had a few issues with certain batch numbers. I’ve had to send one back to them for a box I’m currently rebuilding for someone. 🤦🏻‍♂️